Specifications

eucalyptus core marine plywood for concrete formworks
1.Certificate:ISO9001,American CARB
2.Material:,Eucalyptus,
3.glue:WBP

 

commercial plywood

1.Size:1220*2440mm,1250*2500mm,610*2440mm,610*2500mm

2.Thickness: 4mm,5mm,8mm,9mm,10mm,12mm,15mm,18mm,20mm,25mm

3.Glue: WBP                 

4.Core: poplar,hardwood,birch, combi,eucalyptus,birch

5:Grade: BB/CC,DBB/CC,BB/BB,indonesia grade

Thickness less than 6mm:tolerance+/-0.2~0.3mm

Thickness 6~24mm:tolerance+/-0.4~0.5mm

8.Moisture Content: lower than 14%

9.Inner packing: 0.20mm plastic bag 

   Outer packing: Pallet covered by plywood,then with metal strips for strength

Film Faced Shuttering Plywood/Construction Formwork Plywood/Concrete Formwork Plywood/Marine Plywood
Size	1220*2440mm,1250*2500mm, Or as clients requirement
Thickness	9mm,12mm,15mm,18mm,21mm etc,
Core:	Poplar, Hardwood, Birch , Combi etc,
Film	Dynea(import)brown film ,brown(domestic)film, black(domestic) film,red film, yellow film ,
Length(width) tolerance	+/-0.2mm
Thickness tolerance	+/-0.5mm
Processing of edge	By warterproof painting in diffirent colors
glue	WBP(phenolic) MR(water proof) MELAMINE(water proof)
Mositure content	8%-12%
Density	>550-650KGS/CBM
Modulus of rupture	>30MPa
Modulus of Elasticity	>6000MPa
packing	bottom is pallets, covered with plastic film,around is carton or plywood, strenghthen by steel or iron 3*6
quantity	20GP	8pallets/21M3
	40GP	16pallets/42M3
	40HQ	18pallets/53M3
Usage	Usage adequate for making construction formwork plywood, concrete formwork plywood,marine plywood etc
Minimum Order	1*20GP
Payment	TT or L/C at sight
Delivery Time	Within 20 days receiving deposit or original L/C at sight

 advantanges:

 1.We have our own factory to make poplar and hardwood veneer. On one hand ,we can control the qulity of the material of plywood ,on the other hand ,we can control our cost and offer you the more competitive price.

2.We can make melamine glue by ourselves now. And,it has a huge viscosity.we also can buy the more perfect other glue for you.

3.The pressure during the hot-press usually is 18-20pa .therefore ,our plywood are more tough.

product