Product Details

Specifications

1,electromagnetic locks fail-safe: unlocks when power is removed
2,Easy installation: suitable for both new and retrofit usage

Electro magnet for door Description

An electromagnetic lock, magnetic lock, or maglock is a locking device that consists of an electromagnet and an armature

plate used for access control door locks. By attaching this to the door frame and the armature plate to the door, a current

passing through the electromagnet attracts the armature plate, holding the access control door lock shut. Unlike an electric

strike access control door lock a magnetic lock has no interconnecting parts and is therefore not suitable for high security

applications because it is possible to bypass the lock by disrupting the power supply. Can work with networking access

control system.The whole system includes electric lock,power suply,access controller,exit button,door bell or RFID cards.

Electro magnet for door Technicals

Product	Single door electromagnetic lock
Lock Dimension	2075329.5(mm)
Armature Plate Dimension	180L38W11H(mm)
Input Voltage	DC12V or DC24V
Holding Force	280KG(600LBS)
Current	12V/450mA 24V/230mA
Weight	2.2KG
Suitable Humidity	0-90%(non-condensing)
Lock Finish	Chrome plating
Cover Finish	Drawing oxidation
Safety Type	Fail Safe
Suitable	Wooden door, Glass door, Metal door, Sliding door.

Differences of Electromagentic Lock

	High level EM lock		Middle level EM lock
Item		HLEM400series HLEM600series HLEM660series HLEM1100series		MLEM400series MLEM600series MLEM660series MLEM1100series
Material		Pure ironDT4C		Top grade silicon sheet
Coil		100%copper		60%copper 40%Aluminum
Finish		Top grade polished chrome		Zinc plating-blue white

Electro magnet for door Advantages

1.Design without Mechanical Failure

2.No residual magnetism

3.Adjustable mounting bracket

4.Life of more than five years

5.Pure iron is not easy deformation

6.The super rally adsorption force

7.Low heat

8.Lock body temperature of 20°C

9.CE certificate

Electro magnet for door Installation

Electro magnet for door wiring diagram

Electro magnet for door Trouble and Shooting

Troubles	Cause	Shooting
Door cannot lock	1. Circuitry malfunction or low voltage. 2. The power supply wire is too thin and long to cause big decrease of voltage. 3. Power supply is broken to cause no voltage output. 4. The positive and negative wire of power supply is connected in reverse. 5. The electromagnetic lock no power input.	1. Check the connection, and measure the voltage to see if it is normal. 2. Modify or change the power supply wire into thicker one. 3. Check the power polarity and correct the connection. 4. Check to see if power supply or controller is correctly connected to NC.Make sure to see up the controller correctly.
No transform of indicator output with low holding force.	1. The mount plate and the electromagnetic lock face not in complete close. 2. The mount plate is fixed to tight, no room to move. 3. The electromagnetic lock and the mounting plate not at same level for case the door is deformed or moved. 4. The surface of mount plate or electromagnetic lock is not clear. 5. The power supply with lower power. 6. The power supply wire is too thin and long. 7. The electromagnetic lock is malfunction.	1. Check the face of mount plate or electromagnetic lock, if the face of plate is deformed to cause no complete close to the lock, please change the plate. 2. Check if the rubber gasket is put into the stick of plate, and adjusts the bolt of plates not too tight at least a little movable. 3. Adjust the mount plate and electromagnetic lock to be level at each other and close completely. 4. Clean the surface of lock and plate, if rusted to cause no working please change the part. 5. Use millimeter to check the voltage and current of electromagnetic lock to see if it is normal, or need repairing or changing power supply. 6. Change into high quality power supply wire, better no more the 20 meters. 7. Repair or change the electromagnetic lock.
Door cannot open	The power is not cut off	To check out the connection of power supply and controller, the electromagnetic lock is power-on locking power-off opening type. The lock can be open once power off.

Payment:

If the total amount is less than 500USD,we prefer to accept PayPal or Western Union;for big amount we accept bank transfer.

Shipment:

Normally we will use UPS,DHL,FEDEX or EMS express.It usually takes 3-7 working days depending on the countries deliver to.

We can also arrange other shipment way per your requirement and instrution ,such as sea shipment,air shipment ,etc.

Warranty:

Warranty for one year,maintenance forever,change within 3 mounths because of product quality.