Product Details

Corrugated Roll Forming Machine|Corrugated Roofing Sheet | barrel type iron sheet making machine

Technical Specification

Length Of The Sheet : 4267. Max(+20-0)

Width Of The Sheet : 750/914/1000/1250 (+25-10)

Thickness Range Of Sheet : 0.12mm To 0.4mm

Material To Be Corrugated : Full Hard, Semi-Hard, Soft Galvanized Sheets, Alu-Zinc Alloy & Ppgi Sheet

Drive : 15kw-22kw, AC, For Type A 3 Phase

O.D. Of Corrugation Rolls : 380 mm (25 Rods, diameter 16mm)

O.D. Of Pinch Rolls : 317 Mm.

Corrugation Parameters : As Per 3316 To JIS-SGCH –1987.

Wt. Of The Machine : 5.8 Ton Approx .

Production Capacity : 1.5-18 Meter Per Minute.(One Sheet Once Time)

Size : 5700*5012*1650mm

Characteristics

(1) AC. motor of power 15 -22kw.

(2) Corrugation machine is driven by an AC Motor

through a gear reduction drive train.

(3) Pinch roll assembly is driven by a chain & sprocket drive arrangement through both the corrugating rolls.

(4) A tension meter arrangement is fixed on the housing to tighten the chains. This arrangement is provided to avoid the slag in the chain due to screw down operation.

(5) A feed table is provided with gauge blocks to adjust the width of the sheets. This table is mounted on two brackets attached to the housing at both the sides. This table slides on an entry table.

(6) The movement of the feed table is achieved by the crank & levers. The crank is mounted on the bottom corrugating roll.

(7) An entry guide pipe is placed in between the entry table and the housing, for providing the entry of sheet into the corrugating rolls along the pass- line.

(8) An auxiliary table is placed between the corrugating roll assy. And the pinch toll assy. For the proper entry of the corrugated sheets into the pinch roll assy.

(9) An exit table is provided for removing the finished corrugated sheets.

(10) Screw down is for increasing/decreasing the number of crests formed on the sheets.

(11) A screw down is for adjusting the gap between the pinch roll assy.,for maintaining the proper flatness on the crests of the corrugated sheets &to obtain required width.

(12) Gears are provided at both the ends of top & bottom corrugation rolls to adjust & keep the crests in centre.

(13) Grouting of the machine is done by 9 foundation bolts of 22 mm dia & 1000 mm. Length.

(14)

For manufacturing of barrel type corrugation machine

Final product 18-76 corrugated roof produced with the machine should have the following parameters

Packaging & Shipping

Our Services

1.Installation and Training of Machine Manufacturer:

a.If buyers visit our factory and check the machine, we will teach you how to install and use the roll forming machine for sale , and also train your workers/technician face to face.
b.Without visiting, we will send you user manual and video to teach you to install and operate.
c.If buyer needs our technician to go to your local factory, please arrange board and lodging and other necessary things.
2. After Service of Roll Forming Machine for Sale:

a.One year guarantee for whole roll forming machine for sale.
b.24 hours technical support by email or calling
c.If there is any problem found of steel roof sheet roll forming machinery, we will repair roll forming machine for sale for free in one year.

Company Information

We are a Chinese company which specially produce roll forming machine.Botou jinbaili roll forming machinery Co.,Ltd ,which is one of the earliest companies dealing with exporting roll forming machines.Owning advanced equipment and excellent designer our products has reached leading level by high efficiency, high precision and low waste.

We have high technological background,advanced and mature production equipment and perfect means of inspection.We not only produce different type of professional roll forming machine,but also developed intelligent automatic production line of roll forming equipment,C shape purline machine and precipitator anodde plate forming machine ect. We have developed automatic production line of roll forming machine,roof panel,wall panel forming machine series,Glazed tile roll forming machine series,Floor deck forming machine series,Highway barrier forming machine series,double deck color steel tile roll forming machine series,C,Z shaped steel purline machine series,ach camber machine series and bending machine series,insulated sandwich panel machine on the base of traditional roll forming machine ,fair frame and standard model.

Certificated