Product Details

Specifications

1)Control Charging pulse PWM
2)charge current 10A
3)24V/12V AUTO
4)Warranty 1 year
5)CE&ROHS

K10

This solar controller is designed for solar energy power dc supply system,and dc street lamps system ect

Total rated charge current 10A
Total rated load current 10A
System voltage 12V 24V/12V AUTO
Overload, short circuit protection 1.25 times the rated current for 60 seconds, 1.5 times the rated current for 5 seconds overload protection actions
>3 times the rated current of short circuit protection
Empty load loss <6mA
Charging circuit voltage drop Not more than 0.26V
Discharge circuit voltage drop ≤0.15V
Overpressure protection 17V,X2/24V
Operating Temperature Industrial -35°Cto+55°C
Enhance the charging voltage 14.6VX2/24V(Duration10min)(Discharge only if there have been calls)
Enhance the charging voltage 14.4V X2/24V(Duration10min)
Float voltage 13.6V X2/24V(Duration Voltage down to return to action until the charge)
Charge return voltage 13.2V X2/24V
Temperature added -5mV/°C/2V(Upgrade, direct charge, float, charge return circuit compensation)
Voltage voltage 12.0V X2/24V
Put voltage over 11.1V( The initial discharge rate compensation amendment put voltage (load voltage)X2/24V
Overdischarged back voltage 12.6VX2/24V
Control Charging pulse width modulation to PWN

Convenient wiring, simple installation without Day-to-day maintenance, service life is up to 20 years Warranty 1 year, but has no obvious dismantling machine or high breakdown.
2 controller is of low-voltage, project installation shall comply with the principles of safety, avoiding personal safety accidents.