Product Details

metal stair treads
creates a permanently slip resistant surface that is resistant to elements such as grease, dust and oil. When retrofitting over concrete steps, non-slip stair treads is routinely mounted into masonry anchors. Stair treads have become an integral safety component for extreme wear longevity and continual safety.They are available in thicknesses of 1/8″ up to 1/2″ and standard depths of 8″ – 12″. It's important that the correct grating load bar size and grating type is used based on the required stair tread span and loading. The table below is a basic guide used to establish the correct grating type required.

Stair Tread Types: metal stair treads

1. T1 treads
        Making use of ordinary flat pedals, ordinary flat steel edging, no welding pattern guard and non-slip, no welding mounting side-plate, the structure is simple, relatively low use or temporary places. When installed on a welded steel beams, simple,
economic, practical, this is a small project using more extensive.
2. T2 treads
    Ordinary flat and welded, the welding ends of the pedal mounting end plate, end plate and the hole diameter of 14mm
long hole each. Hit the corner of the end plate hole chamfer length, its purpose is to facilitate the installation. Need to complete the post-production punch bolted on steel beams. Such is adopted more widely, features: removable and reusable.
3. T3 treads
        Such models treads on treads varieties are the most widely used. Welding checkered front angle, played a beautiful, non-slip, wear-resistant effect. When installed using welding installation methods, and simple saving. Such pedal with
checkered cover the sharp edges and corners, to avoid serious injury caused by the slide bump
4. T4 treads
    T4 treads T3 combines the advantages and benefits of a safe and beautiful T2 treads treads bolt installation. It can to bolt installation, easy disassembly; then welded checkered Corner, beautiful and safe correct. Reuse high, a collection of more than a few of the advantages of the product price in this series is the highest.
5. T5 treads
        T5 treads are using with the groove-shaped bar made of steel angle, instead of the checkered angle to use. Effect, quality, use and using the same methods and T3 treads. Using less.
6. T6 treads
   T6 is the use of the same pedal with groove-shaped bar made of steel angle, instead of the checkered angle to use. Effect, quality, with passers-by and use the same side and T4 treads. Since the appearance of the strip steel angle checkered inferior angle, using less.

Finished: metal stair treads

Self colour
Painted
Hot dipped galvanized

Advantages: metal stair treads

* Stair treads provide a durable walking surface but features benefits like grating which allow for drainage and air flow. It ensure slip resistance for many years to come.
* Stair treads have a protective finish such as paint or galvanizing. Without this surface treatment, stair treads can rust easily if exposed to moisture. Therefore it should be primed, painted or hot dipped galvanized to prevent corrosion. Hot dipped galvanizing is the preferred method for corrosion resistance.
* Non-slip galvanized stair treads are formed to job specifications. Treads can be formed into a channel to completely cover an existing slippery stair.
* Stair treads are easily retrofitted over existing concrete, grating or unsafe diamond checker plate assemblies. It can be welded directly onto current treads or can be bolted in place.

Applications:
Stair tread bar grating is a great choice for many industrial flooring applications. Smooth or serrated surfaces are available depending on your project needs for stair tread bar grating. Some common applications include:
Flooring
Walkway
Catwalk
Drain
Deck
Architectural

checkered nosing strip nosing