Product Details

Specifications

1,thickeness:40mil,50mil,60mil,65mil
2,width:2" to 8"
3,length:25m,20m,15m,10m
4,certification:DVGW,SGS

Bitumen tape

Description

Polyken 934 Cold applied tape coating system designed for the corrosion protection of field joints, fittings, and specialty piping&waterproofing. The highly conformable backing and thick, aggressive adhesive also make it the ideal repair system for all types of main line coatings.

The tape with very tacky adhesive has a release plastic liner to enable proper unwinding of the roll. Whether used as a single wrap with a mechanical layer or a double wrap system, the Polyken934 tape coating system is universally specified in the oil, gas and water industries

It could be applied after the primer by hand or with a wrapping machine

Structure

The specification of the tape consists of three layers,

Backing:Special blend of stabilized polyolefines

Adhesive:Butyl rubber Bituminous Compound and Adhesion Promoting Resins

Interleaf:Antiadhesive Film Treated with Silicone

Features

_ Excellent adhesion to pipe and self

_ Flexibility provides extra protection at vulnerable areas

_ Excellent conformability and consistent uniform thickness

_ Easily applied with no special equipment

_ Compatible with common pipe coatings

_ Excellent resistance to cathodic disbonding

-Resistant to UV

_ Can be applied over a wide temperature range

_ Good conformability and consistent uniform thickness

_ Cold applied

_ Heavy duty butyl bitumen compound adhesive ensures a strong bond & impervious seal.

Technical datas

PROPERPTIES	UNIT	TEST METHOD	TYPICAL VALUES
			934-40	934-50	934-60	934-65
Total thickness	mil	ASTM D 1000	40mils	50mils	60mils	65mils
Tensile Strength	lb/in	ASTM D 1000	30(5kg/cm)	35(6.3kg/cm)	39(7kg/cm)	42(7.5kg/cm)
Elongation	%	ASTM D 1000	400	400	450	500
Length			25mtrs	20mtrs	15mtrs	10mtrs
Width			2”,4”,6”,9”
Peel adhesion To primed pipe	oz/in	ASTM D 1000	269(3kg/cm)	296(3.3kg/cm)	314 (3.5kg/cm)	340(3.8kg/cm)
To backing	oz/in	ASTM D 1000	90(1kg/cm)	90(1kg/cm)	117(1.3kg/cm)	135(1.5kg/cm)
Dielectric Strength	KV/mm	ASTM D 1000	42	42.6	43	43.8
Volume Resistivity	ohm·m	ASTM D 257	2.5 X 1012	2.5 X 1012	2.5 X 1012	2.5 X 1012
Water Vapor Transmission Rate	g/ m2 /24h	ASTM E 96	0.06	0.05	0.03	0.02
Water Absorptivity	%	ASTM D 570	0.1	0.1	0.1	0.1
Application Temperature	°F		-31-+160 (-35-+70°C)
Max service temperature	°F		-40-+176 (-40-+80°C)
Performance	AWWA C-209,ASTM D 1000,EN 12068