Product Details

Solventless Lamination Machine - 1000mm

Speed : 300 meters / minute

INCLUDE

High precision measuring steel roller, three rollers for Adhesive Transfer.
Adjustable Adhesive Quantity
Centralised HMI Operation for Various Parameters / Machine Operations
Roller Heating Through Water Heating Systems (Make - Corn Air System)
Adhesive Auto Mixer (Adhesive Dosing System) (Make – Twin Engineers)
High precision A.C. Multi drive System (Make - S.A. Automation)
Servo System for all Motors
Drives - Siemens
Unwinder / Rewinder Diameter : 800mm (350 kgs.

SOLVENTLESS LAMINATION MACHINE :-

GENERAL SPECIFICATIONS : -

Max machine speed : 300mtr/min
Working Web width : 1000 mm
Un-winder / Re-winder diameter : 800mm (350 kgs.)

MAIN FEATURES :-

High precision measuring steel roller with three rollers for adhesive transfer.
Precision micro gap adjustment for adhesive ensures precise coating weight.
Independent rubber roller for loading/unloading.
Back up pressure for lamination nip to ensure better performance.
Roller heating through water heating systems– 02nos. (1^st @R1, R2, R3 & 2^nd @ R5)
High precision digital AC vector drives.
Very precise tension controls due to High Performance electronic components.
Shaft less un-winders and re-winder.

SOLVENTLESS LAMINATOR MACHINE - 1000

Application -- Solvent less Laminator Machine with digital AC vector drive and Servo motor for the purpose of laminating the two different substrates.

Primary Unwinder

Polyester 10 – 18 micron

opp / bopp 15 – 25 micron

Metallized polyester 12 – 25 micron

LDPE, HDPE, LLDPE 40 – 80 micron

Secondary Unwinder

BOPP 12 – 80 micron

ALU 12 – 40 micron

LDPE, LLDPE 20 - 200 micron

NYLON CAST 20 – 80 micron

Polyester 10 – 18 micron

OPA 12 – 18 micron

CALANDERED PAPER 45 - 80 g/m²

GENERAL SPECIFICATIONS

Machine Name SOLVENTLESS LAMINATION 1000

Maximum web width 1000mm.

Minimum web width 500mm.

Mechanical speed 350 Mtr / max.

Working Maximum speed 300 Mtr / max.

Primary Unwinder ---

Maximum Roll Diameter 800 mm. (350 kgs.)

Inside Core Diamete 76 mm / 152 mm

Core OD 100mm

Direction Unwinding both direction unwinding

Secondary unwinder ---

Maximum Roll Diameter 800 mm. (350 kgs.)

Inside Core Diameter 76 mm / 152mm

Core OD 100mm

Direction Unwinding both direction unwinding

Rewinder ---

Maximum Roll Diameter 800 mm. (450 kgs.)

Inside Core Diameter 76 mm / 152mm

Core OD 100mm

Direction Rewinding both direction Rewinding

Tension Range ---

Primary unwinder 3– 30 kg. (30N- 300N)

Secondary unwinder 3– 30 kg. (30N- 300N)

Rewinder 5- 50 kg. (50N-500N)

Coater 3– 30 kg. (30N- 300N)

(Adjustable Taper Tension 0% to 40% of set value for rewinding)

Coating Unit 1 No.

Laminator 1 No.

Rewinder 1 No.

Primary unwinder Pneumatic brake (forced cool)

Secondary unwinder Pneumatic brake (forced cool)

Metering Drive 1 No.

Roller Heating Through water heating (two separate unit)

Mixer and Dispensing Unit For two components adhesive (solventless)

Vapor exhausting Yes

Direction of the machine LH(LEFT) TO RH(RIGHT)

Electric supply voltage 415 ± 5%, 50 Hz ± 2% 3ph

Control voltage 24 VDC / 230VAC

air

Air pressure at machine Minimum 6kg /cm²

Water content 0.01% (Dry Air)

Water

Pressure at machine 2 – 3 kg /cm²

Water temperature 15 – 30 ⁰C

composition of the machine

Foundation ---

The machine dose need particular foundation and can be fixed to the floor, reasonably leveled condition and in line with the lamination and coating colums.

Unwinders and Rewinder ---

Machine is equipped with two unwinders and one rewinder for reels having diameter up to 800 mm. very similar in construction.

Primary unwinder is mounted behind the coating unit on the coating column where as the secondary unwinder and the rewinder are mounted on opposite sides of the lamination column.

Unwinding tension is controlled by load cell roller with Pneumatic Break and that of rewinder by means of load cell which operates the motor, keeping the preset tension constant.

The lay-on roller provided on rewinder is kept in contact with winding substrate (reel) with two pneumatic cylinders. In addition to compacting the web, it also performs other functions like prevention of air accumulation between layers of substrate & discharge of static electricity of winding material.

The coating station is composed of the coating unit, the suction hood and the primary material unwinders.

BASIC DESCRIPTION

Coating Station ---

The Solvent less coating unit consists of five cylinders

Cylinder R₄: Coating

Cylinder R₃: Carrier (Transfer)

Cylinder R₁ & R₂ : Metering

Cylinder P₁ & P₂ : Pressure

Cylinder R₅: Laminating Roll

Cylinder R₆: Back up Roll

Temperature of chrome plated roller R₁& R₂ can be thermo regulated through Hot water circulation

Rubber coated roller R₃ equal to web width is used, which slides along two lateral guides, tilted to keep it in contact with roller R₄& R₂

Transfer of adhesive to the web is carried out through roller R₄ (chrome plated steel roller) that also ensures uniform temperature.

Roller P is used as pinch roller. Primarily it is a rubber-coated roller, pressed against the web pneumatically with adjustable pressure on each side. It is moving in synchronization with line speed.

AC motor, drives the roller R₄controlled through AC digital vector drive. Roller R₄ in turn pulls the web under pressure from roller P at line speed.

A motor driven by AC digital drive in turn rotates roller R₃& R₁ through fixed ratio worm gear. Their temperature is governed through thermo regulation by circulating water.

Fixed roller R₁ can be manually rotated for cleaning.

Motion transmission

AC motor, controlled through AC digital vector drive, drives the roller R₄. roller R₄ in turn pulls the web under pressure from roller P at line speed. Tension on the web is kept constant, through load cell based close loop control.

A motor driven by AC digital drive in turn rotates roller R₁ & R₃ through fixed ratio worm gear. Their temperature is governed by circulating water through thermo regulation.

Fixed roller R₁ can be manually rotated for cleaning.

Metering / Adhesive transfer

A feeding head responsible for feeding adhesive is mounted on the trolley, which enables its transverse motion to the machine for uniform dosing.

The adjustable Teflon end plates positioned on roller R₁ & R₂ keep the adhesive within the required web width.

The level of the adhesive is maintained by proximity sensor.

The adhesive moves between roller R₃& R₁. Different coating thickness is obtained by changing the speed of the motor that drives roller R₃ & R₁ with respect to speed of roller R₄.

Exhaust hood

The exhaust hood for vapours created by coating unit consists of: vertical sliding protection and is complete with full slide window that closes the coating unit at the front: a 2000m³/ h suction fan is located on the upper structure, just above the unit.

Lamination Station

The lamination station consists of a laminator, the secondary material unwinders and rewinder as described earlier

The lamination nip is made between the laminating roller and the rubber pressure roller.

The laminator is a chrome plated steel roller, R₅heated / cooled down through water circulation and thermo regulating system. The rubber coated laminating roller has a small diameter to reduce the contact area with laminating cylinder to achieve the best quality.

The lamination roller is driven by AC motor controlled by AC Digital Vector Drive and carries over the two webs, primary and secondary, at line speed, rightly “pinched” by the pressure roller

Hardchrome Plated Backup Roll R₆is for Proper Lamination.

Upper Structure

The upper structure is a horizontal structure that lies on the two - lamination and coating units. It consists of two crosspieces and a certain number of hard anodised aluminum idle rollers, dynamically balanced and with low friction bearings; they allow the web transfer from the first to the second unit.

Drive System -

Unwider ( primary and secondary ) ………….

Pneumatic Break

Main drive …………..

Dizital vector AC drive & Servo Motor rated 10.0 HP

Metering and Carrier roller drive …………..

Dizital vector ac drive & Servo Motor rated 3 HP

Lamination roller drive ……

Dizital vector ac drive & Servo Motor rated 5 HP

Rewinder drive ………

Dizital vector ac drive rated & Servo Motor rated 7.5 HP

Electric panel

The general electric panel is placed near the machine on the side opposite to the operator’s side.

Reputed make control system with dizital vector A.C drive & unwinder tension control with load cell based imported pneumatic brake will be provided with the machine.

All Servo motors are from Fukuta, italy make.