Product Details

Product Description

1. Product Numbers: NDK200-1 & NDK200-2 Nitrogen Sample Concentration (Invisable)

(1 Block ) & (2 Blocks )

Product description: NDK200 nitrogen concentrator is mainly used for enrichment of large-volume sample or preparation (such as drug screening, hormone analysis, liquid phase, and mass spectrometry in the analysis of sample preparation). Working principle: the nitrogen into the heated surface of the sample and make the solvent t evaporate and separated rapidly, thereby reaching the sample enrichment purpose without oxygen, keep the sample purer. Nitrogen concentrator instrument can concentrated dozens of samples simultaneously, saving time and high efficient, instead of rotary evaporation instrument.

Product features

1. Synchronously working with heating by dry bath in the bottom and nitrogen blowing on the surface accelerates liquid evaporation and sample concentration.

2. The position of gas needle in air cavity can be adjusted to suit for different types of tubes.

3. The height of the air cavity can be adjusted. The length of a standard gas needle is 150mm.

4. Gas needle is controlled independently. Separately blow of each needle and flow regulating of each needle are available to avoid gas waste.

5. The entire equipment can be put into ventilation cabinet when the concentration sample in toxic solvents.

6. Built in overheat protection, automatic fault detection and fault beep alarm devices.

7. LED display immediate temperature and diminishing time. Operation is simple and convenient.

8. Standard configured air cavity and adjustable bracket.

NDK200-1 Nitrogen Sample Concentrator (1 block )

NDK200-2 Nitrogen Sample Concentrator (2 blocks)

Technical Parameters

Model	NDK200-1 nitrogen concentrator	NDK200-2 nitrogen concentrator
Temperature range	RT+5℃ to 150℃
Heating time	≤30min (from 40℃ to 150℃)
Temperature accuracy(40~100℃)	±0.5℃
Temperature accuracy(100~150℃)	±1℃
Temperature uniformity(100℃)	±0.5℃
Blocks Quantity	1 pieces	2 pieces
Time range	99h59min
Nitrogen flow	0—10L/min
Nitrogen pressure	≤0.1MPa
power	200W	400W
Dimensions	230x200x500 mm	260x220x500 mm
Blocks Selection	Refer to the “ Exchangeable blocks for NDK Series”

Blocks replacement for NDK Series

Type	Description	Block Dimension (mm)
DT01A	Φ6 mm x 12	95.5 x 76.5 x 50
DT02A	Φ7 mm x 12	95.5 x 76.5 x 50
DT03A	Φ10 mm x 12	95.5 x 76.5 x 50
DT04A	Φ12 mm x 12	95.5 x 76.5 x 50
DT05A	Φ13 mm x 12	95.5 x 76.5 x 50
DT06	Φ15 mm x 12	95.5 x 76.5 x 50
DT07	Φ16 mm x 12	95.5 x 76.5 x 50
DT08	Φ19 mm x 12	95.5 x 76.5 x 50
DT09A	Φ20 mm x 6	95.5 x 76.5 x 50
DT10A	Φ26 mm x 6	95.5 x 76.5 x 50
DT11A	Φ28 mm x 4	95.5 x 76.5 x 50
DT12A	Φ40 mm x 2	95.5 x 76.5 x 50
DT13A	0.5ml centrifugal tube x 12	95.5 x 76.5 x 50
DT14A	1.5ml centrifugal tube x 12	95.5 x 76.5 x 50
DT15A	2.0ml centrifugal tube x 12	95.5 x 76.5 x 50
DT16A	0.2ml tube x 12	95.5 x 76.5 x 50
DT17	Flat (96-hole Enzyme Plate)	78 x 114 x 26
DT18	customized	customized

2. Product Numbers: NK200-1B Nitrogen Sample Concentration (Visible)

The sample surface in the tube can be observed while concentrating.

Description and Features are the same as the NDK 200 series.

Model	NK200-1B Visual Nitrogen Concentrator
Temperature Range	R.T.+5°C ~ 150°C
Heating Time	≤30min (from 40°C to 150°C)
Temperature Accuracy (40~100°C)	±1°C
Temperature Accuracy (100~150°C)	±1.5°C
Temperature Uniformity (100°C)	±1°C
Temperature Display Accuracy	0.1°C
Blocks Quantity	1 block
Time Range	99h59min
Nitrogen Flow	0~10L/min
Nitrogen Pressure	≤0.1MPa
Power	400W
Dimensions	260 x 220 x 520 (mm)
Blocks Selection	Refer to “Exchangeable blocks for NK200-1B”

Blocks replacement for NK200-1B Series

Type	Tube Diameter	Tubes	Block Size (mm)
NK01	10 mm	12	153.5 x 96 x 49
NK02	12 mm	12	153.5 x 96 x 49
NK03	13 mm	12	153.5 x 96 x 49
NK04	15 mm	12	153.5 x 96 x 49
NK05	16 mm	12	153.5 x 96 x 49
NK06	19 mm	12	153.5 x 96 x 49
NK07	20 mm	12	153.5 x 96 x 49

3. Product Numbers: NDK200-1A Nitrogen Sample Concentration (96-gas Needles)

Features

The gas chamber height can be adjusted, the length of standard gas needle is 80 mm.

Other characters are the same as the DNK200 Series.

Model	NDK200-1A Concentration(96-gas-needles)
Temperature Range	R.T.+5°C ~ 150°C
Heating Time	≤30min (from 40°C to 150°C)
Temperature Accuracy (40~100°C)	±0.5°C
Temperature Accuracy (100~150°C)	±1°C
Temperature Uniformity (100°C)	±0.5°C
Blocks Quantity	1 block
Temperature Display Accuracy	0.1°C
Time Range	99h59min
Nitrogen Flow Rate	0~10L/min
Nitrogen Pressure	≤0.1MPa
Power	200W
Dimensions	260 x 220 x 500 (mm)
Blocks Selection	Refer to “Exchangeable blocks for NDK200-1A”

Conventional configuration

Supply 2 types of optional blocks – DT16 and DT17. Block can be interchanged easily.

Optional flow regulating valve.

Exchangeable blocks for NDK200-1A

Type	Tube Diameter	Tubes	Block Size (mm)
DT16	0.2ml centrifugal tube	96	78 x 114 x 26
DT17	Plate(no holes)	96 hole enzyme plates	81 x 123 x 19

DT16, DT17 is special configured for NDK200-1A

Packaging & Shipping

Shipping: For trial orders, we will send the goods by International Express like FEDEX, DHL, TNT or UPS. Usually it takes 3 -7work days to arrive.If big quantity we will ship by Ocean transportation, it takes one month to arrive. if urgent, you can select shipping by Air.

Pacakge: All the products wil be packed firmly in standard wooden case/ carton to make sure that the product won't be damaged during the delivery.

Min.order:Min order is one set. Order a HQ container, price will be more favorable.

Payment Term:T/T,Paypel,West Union.