Product Details

Product Description

DTH-100 Dry Bath Incubator

Product Numbers: DTH-100

Product description: DTH-100 DRY BATH INCUBATOR(heating)is a microprocessor-controlled device, high precision of temperature control, sample preparation parallelism, as an alternative to the traditional water bath device. It can be widely used in samples cultivation, preservation and reaction, DNA amplification, Pre degeneration of electrophoresis and solidification. Application of industry includes the pharmaceutical, chemical, food safety, environment, quality inspection.

INTRODUCTION

Product features

1, LCD display, simple interface, double time and temperature settings, Simultaneous display of set temperature display, time diminishing display.

2, high heating speed, uniform heating, accurate temperature control, high stability, low energy consumption and no noise.

3, Built in temperature calibration function, automatic fault detection and buzzer alarm function.

4, Built in over-temperature protection device, safe and reliable use, prolong the service life of the machine.

5, product design, compact and tight, small occupied space, freer and easier.

6, Various blocks for convenient replacement, cleaning and disinfection.

Product technical parameters

Model Specification	DTH-100 Dry Bath Incubator (heating)	DTC-100 Dry Bath Incubator (cooling)
Temperature ControlRange	RT+5℃—100℃	-10℃—100℃
Temperature Control Accuracy 100℃	≤±0.5℃
Block Temp Difference 40℃	0.3℃
Block Temperature Uniformity	≤±0.3℃
Display Accuracy	0.1℃
Heating Time	≤15min (from 20℃ to 100℃)
Timing Range	99h59min
Maximum Temperature	100℃
Cooling Time	/	≤30min from RT to RT - 30℃,( detect at 26℃)
Maximum Power	150W
Net Weight	2.2Kg
Dimension ( LxWxH)	270x196x170 mm
Block Selection	Refer to ” Exchangeable blocks for DTH-100/DTC-100 series”

Type	Description	Max.Temperature
A	96×0.2ml PCR plate	100℃
B	54×0.5ml	100℃
C	35×1.5ml	100℃
D	35×2.0ml	100℃
E	20×0.5ml+15×1.5ml	100℃
F	24×Dia. ≤ φ12mm	100℃
G	32×0.2ml+25×1.5ml	100℃
H	32×0.2ml+10×0.5ml+15×1.5ml	100℃
I	103×67×30mm (water bath block)	100℃
J	96×0.2ml plate (flat bottom)	100℃
K	24×5ml (High cover)	100℃
L	12×15ml (High cover)	100℃
M	6×50ml (High cover)	100℃
N	Customized Block	100℃

DKT-100 Dry Bath Incubator

Product Numbers: DKT-100

Product description: DKT-100 is a new designed dry bath incubator for economic choice. It is well received with lovely appearance, excellent performance and attractive price. DTK-100 dry bath incubator is allocated round heating block. Its good temperature accuracy makes this dry bath incubator extensive used for sample incubation, conservation and reaction in medicine, chemical, food safety, quality testing and environmental industries, etc.

INTRODUCTION
Features

1. Fast heating speed. Heating temperature accurate. Temperature controlling precise. Stable without noise.

2. Built-in temperature deviation calibration function, automatic fault detection, and beep alarm function.

3. Built-in over-temperature protection device, safe and reliable.

4. Compact structure designed, small space occupied. Transparent cover.

5. Serious of round heating blocks for choosing. Easy exchange and clean for different types of tubes.

Parameters

Type	DKT-100
Temperature Control Range	R.T.+5°C ~ 100°C
Heating Time	≤ 10min (from 20°C to 100°C)
Temperature Control Accuracy	≤ ± 0.5°C
Temperature Display Accuracy	0.1°C
Block Temperature Uniformity	≤ ± 0.5°C
Maximum Power	150W
Maximum Temperature	105°C
Time Setting	9999 min
Dimension	176 x 156 x 121 mm
Net Weight	1.5Kg
Block Selection	Refer to “Exchangeable blocks for DKT-100”

Conventional configuration

DKT100B/DKT100C/DKT100D

E.g.:DKT100B means select the type DKT100 with Block type B-100.

Exchangeable blocks for DKT-100

Type	Description	Dimension
A-100	96×0.2ml	Φ104.5mm x 32
B-100	59×0.5ml	Φ104.5mm x 32
C-100	39×1.5ml	Φ104.5mm x 32
D-100	39×2.0ml	Φ104.5mm x 32
E-100	18×5.0ml	Φ104.5mm x 32
F-100	24×0.5ml+30×1.5ml	Φ104.5mm x 32
G-100	59×6mm	Φ104.5mm x 32
H-100	Customized blocks	Customized blocks

Mini Dry Bath Incubator

Product description: The mini dry bath is a micro-processor controlled heating block with heater (heating types) or semiconductor refrigeration (cooling types) technology. It adapts onboard use, smart, light and convenient for movement, suit for any kind of occasions. The type 100F is with fan for heat dissipation, which makes temperature down much faster than nature cooling.

INTRODUCTION

Product features

1. Unique designed. Smart and light, convenient movement, suit for various occasions.
2. LCD simultaneously display setting and actual time and temperature. Temperature calibration function.
3. Automatic fault detection function with buzzer alarm.
4. 24V DC input power, built-in over-temperature protection device.
5. Various of blocks for optional choice. Convenient for replacement. Easy cleaning and disinfection.

Product technical parameters

Model	MINIB-100F	MINIB-100	MINIB-100I	MINIC-100	MINIC-100I
TemperatureControl Range	R.T.+5°C ~100°C			-10°C ~100°C

Temp. Control Accuracy@100°C	≤±0.5°C
Block Temp Difference@40°C	0.3°C
Block Temp. Uniformity	≤±0.3°C
Display Accuracy	0.1°C
Timing Range	0-999min
Max. Temp.	100°C
Max. Power	60W			120W
Cooling Time	fan cooling	natural cooling		≤30min (from R.T. to R.T.-20°C
Net Weight:	≤1.0kg			≤1.4kg
With Thermo Lid	NO	NO	YES	NO	YES
Block Selection	Refer to ”Exchangeable Blocks for Mini Dry Bath Series”

Exchangeable blocks for Mini series

Type	Dimension	Description	Remark
MINI-A	0.2ml tube	40×0.2ml	8x0.2ml strip
MINI-B	0.5ml tube	24×0.5ml
MINI-C	1.5ml tube	15×1.5ml
MINI-D	2.0ml tube	15×2.0ml
MINI-E	cuvette	8~12.5×12.5mm
MINI-F	15ml tube	4x15ml	cover cannot be closed
MINI-G	50ml tube	2x50ml	cover cannot be closed
Customized blocks

Others Type :

Main Products