Product Details

Product Description

AYJ-302B ayplus fda approved tattoo removal lasers

Tattoo removal. Remove all kinds of tattoo, eyebrow tattoo, lips tattoo and so on.
Remove punctate speckle, age spot, birth mark, Nevus of Ota

Technical principle of Q-switch ND:YAG laser

The energy of Q-switched Nd:YAG laser can be absorbed by pigment of target tissue like tattoo, speckle, birthmark and so on.

The pigment will be fragmented so small that they can be metabolized by the lymphatic system or egested out of the body. Thus the tattoo or other pigmentations will be removed without damage to normal tissue. The treatment is safe and convenient without downtime and side effects.

Technical Features

The highest configuration in Q-switch ND:YAG lasers

1. no blood without anesthesia.

2. new blue LCD display, micro-computer automatic counting.

3. Ruby movement, movement without changing, lifelong maintenance.

4. Optical pulse energy, completely removing pigment.

5. dual-wavelength settings to effectively get rid of pigmentation 532nm1064nm.

6. the new cooling system, air cold cooling thermoelectric built-in closed cycle air cooled, single working longer hours.

Parameter:

Wavelength	1064 nm and 532 nm
Number of Treatment head	one
Pulse Duration	6-10ns
Energy density	800 mj & 400mj
Pulse rate	1/2/3/4/5/6 Hz
Cooling system	water cooling, air cooling, semiconductor cooling
Power supply	220V/50Hz or 110V/60Hz
Dimension(cm)	14″×14″×10″(36cm×35cm×27cm)
Net Weight	16 kg

Notes:

1) before start, you must observe water levels to ensure equipment inside has plenty of water.

2)open the machine switched by key,you must see instrument internal water flow from the water input entrance(Note: see water blowout from spout or water fluctuations)then the next step.

3)if the water is not circulated, repeatedly start times (Note: key switch repeatedly to start, does not press working key) and then put the gun high to low position, repeated several times, until the water loop.

4)when adding water,you should observing the water level so that not to let water overflow into the instrument, instrument internal power supply will damaged.

5) after changing the water, if the water does not cycle properly, please refer to the 3rd.

6) After use the equipment 30 days,please replace distilled water completely.

7) sophisticated and fragile components are installed within the handle of machine, please place and use carefully.