Specifications
high-performance, compact conformation, easy operation, convenience adjustment of fabric, the high degree of automation
YJ-III-SRD rapier loom
is the new high speed rapier loom which is adopted the modular design concept with simple structure, good performance, low power consumption, the abundant yarn woven and clear types. This loom is designed specially for the investor and controlled by leading level computer processing system.
1 Main Motor
We adopt the low energy consumption environmental super SRD main motor, which uses oilcirculation cooling system to lower the temperature. This main motor drives the loom instead of belt, clutch and brake disc to keep the first beating-up of the reed in order to eliminate the uneven weft density. This main motor control the speed of the loom so the speed can be easy adjusted according to the yarn quality. The electronical consumption of this loom is over 10% lower than the common clutch rapier loom.
2 Weft Selecting
Every weft selecting finger is moved by the stepper motor.
The weft selecting fingers go back to the middle position to keep the tension force constant when the rapier clamps the weft yarn. The craft setting is input by the precision program on the display of the electrical box.
3 Rapier Drive Style
We adopt the unitary unilateral guide hook. The rapier is light enough to enter into the shed stablely. It reduces the friction with the warp.
4Auto Pick Find
The auto pick find and slow mode is finished slowly by the SRD main motor.
5The lifting time can be set in the display easily.
6Lubrication System
7The Warp Tension
Take up and run in device is drived by servo motor. The signal of warp tension sensor keeps warp tension force.
8Electronic dobby may take 20 pieces of heald frames
9Electronic Selvedge
The leno selvage is drived by the pendent stepper motor instead of two heald frames.
10Yarn Woven
Discontinuous yarns: Nm200-Nm3
Continuous yarns: 22den-3000den (25dtex-3300dtex)
11 Firm structure and modular design
Two sides van cast iron wallboards are connected by two beams. This firm structure eliminates the mechanic parts vibration and keep the rapier loom working stablely in high speed.
12 Timely effective satisfied technical assistance
There are 3 Maintenance Service Centres to keep 7*24 hours after-sale service for our rapier looms. Besides, we set up hotline 0635-8883786 to support our technical assistance.
TECHNICAL SPECIFICATIONS (Standard) |
Reed Width | 190,210,230,260,280,320, 340,360,380cm | Run in device | positive electronic run in device |
Max width reduction | 35cm each side | Diameter of beam | 800-1000mm |
Speed | 500rpm-600rpm | Back rest | single and double back rest |
Performance | 1000m/min | Selvage | independent electronic selvage |
Weft density | 130picks/cm,can be adjusted by yarns woven | Warp stop device | 6 lines of electronic droppers |
Yarns woven | Discontinuous yarn: Nm200-Nm3(Ne120-Ne1.8) | Take up device | positive electronic take up device |
Continuous yarn: 22den-3000den(25dtex-3300dtex) | Loom drive | Super SRD main motor driving |
Weft selecting | 1-8 color, every weft selecting finger is moved by the stepper motor. | Pick finding | auto pick finding |
Weft control | anti-double wefts function | Control system | controlled by computer with clear LCD and humanity design |
Sley | two sides' conjugate cam | Lubrication | booster circulation and filtration system |
Shed formation | Staubli electronic dobby | Size | 4659*2031mm |
Main Products: Seamless steel pipe & tube
Business Type: Manufacturer
Liaocheng Shandong China
Facebook
X
Pinterest
Linkedln