⇒JNC diesel fuel oil making crude petroleum refinery machine

WORKING PROCESS OF JNC diesel fuel oil making crude petroleum refinery machine

Pump the crude petroleum oil into the heater,and heat it to its working temperature via coal (or fuel oil, gas).

The maximum working temperature is about 410 degrees.

The required gasoline and diesel can be obtained after catalytic distillation.

When the reaction of crude petroleum oil in the reactor is complete, JNC will stop heating automatically,after that we can just remove the residue from the bottom of the tank and then JNC small scale crude petroleum oil refiney plant can be used again.

SYSTEMS OF JNC diesel fuel oil making crude petroleum refinery machine

Reaction tank:crude petroleum oil will be pumped into this tank from the primary filter

Heating system: by burning coal or fuel we can work the oil temperature up to setting value.This system equips with insulation system as well.

Catalytic system: crude petroleum oil reaches the expected temperature,via catalytic effect,and the gaseous hydrocarbons become gasoline and diesel compositions.

Cooling system: after the catalytic effect,the gasoline and diesel compositions will be condensed into liquid materials.

Temperature control system: to make sure the crude petroleum oil transformed into gasoline and diesel.When the crude oil is dried by distillation,it can stop heating timely.

Tail gas handling system: through tail gas system,a small amount of unliquefied gas left can meet emission standards.

OIL OUTPUT RATE AFTER BEING PROCESSED THROUGH JNC diesel fuel oil making crude petroleum refinery machine

Diesel: 86%-88%

Gasoline/Petrol: 5%-6% (If necessary,we can increase the gasoline output by adjusting the catalyst formula)

Heavy Oil Residue:  6%-8%

________________________________________________________________________________________________________________

REFINED OIL COMING OUT AFTER BEING PROCESSED THROUGH JNC diesel fuel oil making crude petroleum refinery machine

MAIN BENEFITS AND ADVANTAGES OF JNC diesel fuel oil making crude petroleum refinery machine

1 Working principle: crude petroleum oil under the action of catalyst distillation gets high quality diesel and gasoline directly.

2 No need of acid,alkali,or activated clay to refine the final diesel, just use our plate-and-frame filter( carried with JNC) to remove the impurities.

3 The operating method of JNC diesel fuel oil making crude petroleum refinery machine is Directly heating with fuel or gas, which is safe, convenient,and practical practical.

4 Environmental friendly: It is completely sealed while running JNC diesel fuel oil making crude petroleum refinery machine,so it won't release any harmful gas to human and the environment.

4 The total cost of processing used oil is only USD15 per ton (including fuel, electricity and catalyst cost).

5 Oil Ouput Rate: diesel 86%-88%,gasoline 5~6%,oil residue 6~8%.

6 Different from other equipment on the market: for JNC diesel fuel oil making crude petroleum refinery machine,we use a special way of heating with a high thermal efficiency so that it doesn’t form carbon deposition easily, which greatly reduces your maintenance costs.

7 Currently on the market, the distillation is based on coil heating, due to the temperature which can’t meet the technical requirements, the oil yield only achieve to 65%.

This kind of heating mode will make it easy to scale. More importantly, it needs high temperature pump which is expensive and easily breakable. These weaknesses mean you need high cost of frequent replacement after.

8 JNC diesel fuel oil making crude petroleum refinery machine is safe, reliable and very durable. And it’s easy to operate and low on labor intensity, only 1-2 workers are enough to make the machine work.