Mini pellet production:

The smallest pellet production adopts SZLH250 type pelletizer as a key plant.The capacity is 200kg/h,total power is 35kwh,price is less than ten thousand dollars.That's why we called it mini pellet production .

Features of mini pellets production

1. Whole transmission parts (including motor) of feed pellet machine chooses high-quality NSK/SKF bearings to ensure the transmission efficient, stable, low noise. Main motor choose Siemens. 

2. This feed pellet machine is equipped with full single layer stainless steel conditioner, ring die and cutter. 

3. Optional parts: Feed pellet machine can be equipped with double jackets stainless steel conditioner and dual spindle differential conditioner according to demands. 

4. A variety of overload protection devices and warning signs on feed pellet machine. 

5. Structural alloy steel main shaft with good strength and toughness. Feed pellet machine can be widely used in pelletizing poultry feed, fish feed, cotton seed hulls, and other materials.

Parameter of the mini pellet production

Working principle of Mini pellet production

A. The feed ingredients run through feeder into conditioner and will be conditioned & mixed in the conditioner with vapor, then it goes into the pelletizing chamber through blanking taper slot.

B. The powder material is feeded by scraper into the second pelletizing zone in the ring die. And then the material will be pressed by ring die and rollers into pellets.  

C. The pellet is discharged from the die hole and cut into the requested size by the cutter.

Application of mini pellet production:

Mainly used for making animal feed ,aquatic feed ,biomass brick.

1) How did you define your animal feed pellet machine model as 250 / 320 / 350 /420 / 508,  etc. ?

 The model is defined based on the diameter of the ring die mould.

 For example, mould 250 means that the diameter of the ring die is 250 mm. 

 2) If we only buy one set of cattle feed machine, could we produce feed for different kind of animal and poultry? 

 Yes. of course.  

 What we need to do is just have different size of ring die mould according to the requirement of different animal and  poultry.  and the replacement of the ring die mould is very easy. 

 3) what kind of raw material that the ring die mould is made of?

 There are two kinds of ring die mould in the market. one is made of carbon steel, the other is made of stainless  steel.   the former is cheaper than the latter.

 We adopt stainless steel ring die and press roller sheel in our machine.

 4) Is it possible that we only buy one set of feed pellet machine to produce animal feed? without other equipment?

 Should to say :  Yes, It's possible.

 but you'd better find the proper way to load and mix the raw material.  otherwise, you will have to do such jobs  by hands.

 5) What is the suitable moisture (water content) of the raw material that easy to make feed pellet?

 the ideal moisture range is from 15%  to 18% .

 6) What brand of motors you used in the machine?

 We use Siemens brand motor in our machine. please rest assured about the quality.

 7) what about the power, capacity, size and weight of the poultry feed manufacturing machine? 

 Please refer to the above technical parameter table to get the detail. 

 If you want the details of our smaller size of poultry feed manufacturing machine, please click here.

 8) will you dispatch engineer to install the cattle feed machine (production line)? 

 Yes. we will dispatch engineer to do the service just based on the requirement of customers. 

 9) where is your factory located? how could I get there? 

 Our factory is located in Zhengzhou, Henan, China. It's 30 km far from the airport. we will pick you up at the airport.