Model: MK-L16RGB

Specification:

1. 1 pc 16W  RGB led ceiling light fiber optic light source with RGB LED inside,but without motor and color wheel.

2. Fiber optic cable capacity: 450pcs 0.75mm fiber cable in max.

3. 1 pc wireless remote controller.

4. 1 year warranty provided for our rgb mixing led illuminator.

MODE1: DMX MODE

Note: FUN = OFF (the tenth code switch up) means to accept DMX512 signal mode
The first DMX address setting:
The decoder set the address bit by coding switch, of which 1-9 is for setting the start address of the Binary numeric code switch of DMX512, the first one is the lowest position, the ninth one is the highest
Bit of address code can be set to 512.

DMX512 start address code is the sum of switches 1-9, at the same time turn downside of the code switch (ON set to "1"), then the value of the bit can be gotten; coding switch up (set to "0"), the value of the bit is 0.

Example 1:

As the following Schematic 1, DMX512 start address is set to 38,

encoding the No. 6,3,2 position on switch dial to "1", others set to "0",      

then the sum of the switch 1-9 code value is 32 + 4 + 2,

that is the DMX512 start address 38                                                                   

Example 2:

As the schematic 2, DMX512 start address is set to 388,

encoding the no. 2,3,6,8 switch dial to "1", others set to "0",

then the sum of the switch 1-8 code value is 4 + 128 + 256 = 388,

that is the DMX512 start address 388.

MODE2: RF MODE           

Note: It will be rf mode  when the No. 10 switch is turned down.

Match Code Function (It is available when leave factory)

1.Power on led engine, it works well when red indicated lights.

2.Press the FADE3 and FADE7 at same time in the effective remote distance, the white color of led engine flash. The code matches success.