Specifications

metal laser cutting 1000w
1.IPG/Coherent fiber laser
2.laser 500w 1kw 2kw 3kw
3.high speed
4.high precision

Metal Laser Cutting 1000w Laser Power 4*8 Feet Working Size Laser Cutting Machine Metal

 

Advantages Comparison between Different Types of Laser Generators of GOLDEN LASER Metal Laser Cutting Machine

	Fiber Laser	YAG Lamp Pump Laser	CO2 RF Metal Laser
Power	500W~3000W	500W/650W/800W	300W/500W
Advantages	Excellent laser beam quality, high cutting precision, high cutting speed, high efficient photoelectric conversion rate, low use-cost and maintenance cost, easy operation and convenient maintenance	Compared with fiber laser generator and CO2 RF metal laser tube of the same power, it has lower price, thicker material cutting ability, wider application field and lower one-time investment.	It can cut metal sheets and non-metal materials. Wider range of applicable materials. Adjustable output power. Maintenance free. Easy to operate and convenient to use.
Applicable Materials	All kinds of metal sheets and pipes	All kinds of metal sheets and pipes	All kinds of metal sheets, acrylic, wood board and other nonmetal materials

<< GOLDEN LASER - Metal Laser Cutting Machine

Fiber Laser Cutting Machine 500W 1KW 2KW 3KW | YAG Laser Cutting Machine 800W 650W 500W

<< Laser Cutting Machine Demo Video on YouTube

1000W Fiber Laser Metal Cutting Machine:        http://youtu.be/pTS88Tc77yI

2000W Fiber Laser Cutting Machine:                   http://youtu.be/NA-O2Pfz3Ew

500W Fiber Metal Laser Cutting Machine:           http://youtu.be/_cfJX9hpj1w

650W 800W YAG Laser Cutting Machine:            http://youtu.be/PlF_oXvbu4s

YAG Laser Cutting Metal Sheet and Tube:           http://youtu.be/1DzK5JBSEik

 

<< Fiber Laser Cutting Advantage

(1) The fiber laser cutting series are metal precise processing equipment powered by fiber laser technology. The quality fiber laser beam results in faster cutting speeds and higher quality cuts compared to other cutting solutions. The key advantage of a fiber laser is its short beam wavelength (1,064nm). The wavelength, which is ten times lower than that of a conventional C02 laser, generates high absorption into metals. This makes the fiber laser become a perfect tool for cutting sheets of stainless steel, mild steel, aluminum, brass, etc.

(2) The efficiency of a fiber laser far exceeds YAG or CO2 laser cutting. The fiber laser beam is capable of cutting reflective metals with much less energy as the laser is absorbed into the metal being cut. The unit will consume little to no energy when not active.

(3) Another advantage of fiber laser is the use of highly reliable single emitter diodes with projected lifetimes greater than 100,000 hours of continuous or pulsed operation.

(4) Golden Laser software allows for the capability to control power, modulation rate, pulse width and pulse shape giving the user full control of the lasers capabilities.

Laser Cutting Machine  XJG-150300JH

Laser Cutting Machine Features

1. Double ball screw close-loop system and open-type CNC system, ensure high processing accuracy and high working efficiency during high speed cutting.

 

2. Standard collocation of 2000W fiber laser generator and optional 500W~3000W fiber laser generator. Low maintenance cost.

 

3. Enclosure design conforms to CE standard for reliable and safe processing. Pallet changer working table is convenient for material uploading and unloading and further promotes working efficiency.

 

4. Aiming at high speed cutting, we design and manufacture strengthened welded machine body after 2 times of aging process, ensuring long-term accuracy and stability of performance.

 

5. Standard collocation of dual-pressure gas control system of 3 gas sources (high pressure air, nitrogen, oxygen) meets the processing requirement of all kinds of materials. Easy operation and low cost.

 

6. Standard collocation of automatic nesting software (including material management and optimized processing technology) and providing with database of process parameters for easy operation and simple management.

 

7. Optimized optical lens, specially designed nozzle and sensor technology realize more smooth and more stable cutting. Optional collocation of 2000mm×4000mm, 2000mm×6000mm working table.

 

Laser Cutting Machine Application Field

suitable for cutting stainless steel, carbon steel, mild steel, alloy steel, galvanized steel, silicon steel, spring steel, titanium sheet, iron sheet, inox sheet and other metal sheet, metal plate, etc.

applicable to sheet metal fabrication, machinery, electrical panel, cabinet, kitchenware, hardware, metal enclosure, elevator panel, sign letters, lighting lamps, decoration, medical instruments, automotive parts and other metal cutting fields.

 

Laser Cutting Machine Technical Parameter

Laser Type	Fiber laser
Laser Brand	IPG / Coherent / Raycus
Laser Power	500W / 1000W / 2000W / 3000W
Working area	1500mmX3000mm / 2000mmX4000mm / 2000mmmX6000mm
Working Table Structure	Fixed Working Table / Pallet Changer Working Table
Control System	PMAC full-closed loop servo control
Driving Mode	Double ball screw driving / Double gear rack driving
Idle/Processing Speed	72m/min / 36m/min; 120m/min / 60m/min
Positioning Accuracy	0.05mm
Protection System	Enclosure protection
Laser Head	Precitec / Laser Mech / Golden Laser
Power Supply	AC220V ± 5% 50 / 60Hz / AC380V ± 5% 50 / 60Hz
Total Power	6KW~20KW
Floor Space	5.6mX3.2m / 6mX4.6m (shuttle working table) 8.5mX4.2m
Other Standard Collocation	Metal nesting software, dual-pressure gas route of 3 kind gas sources, dynamic focus, remote controller, etc.
Auxiliary System
Cooling System:	Dual temperature dual control water chiller with purification system
Lubrication System	Manual lubrication
Laser cooling system	Horizontal air conditioning
Auxiliary gas system	dual-pressure gas route of 3 kind gas sources
Laser cutting head	Dynamic focus
Circuit and protection system	Independent work station
Software System
Software	Golden Laser Cutting Software, Metal Nesting Software
Supported Format:	PLT, DXF, BMP, AI, DST, DWG, etc.
Related Machine Model
XJG-6040 DT	Fiber Laser Cutting Machine 600X400mm
XJG-13090 DT	Fiber Laser Cutting Machine 1300X900mm
XJG-150300 DT	Fiber Laser Cutting Machine 1500X3000mm
GJMSJG-Series	YAG Laser Cutting Machine 600X400mm,1300X900mm,1300X2500mm,1500X3000mm

Laser Cutting Metal Sample Pictures

Why Golden Laser

© Laser innovative application service platform

© Leading laser solution provider

© More than 12 years experience in laser industry

© Laser-World of Photonics Exhibitor since 2005

© Strict quality control and exclusive after-sales service team

© Providing customized laser machines, seeking users & distributors globally

 

Golden Laser offers different type (Co2, YAG, Fiber) of laser machines and provides a comprehensive range of laser cutting, laser engraving, laser marking and laser welding systems. Whether you need a cost-effective machine or a more sophisticated laser solution, from the economical models to the large format automated laser processing systems, even customized laser systems, Golden Laser has the laser solutions that satisfy your requirements.

• Water-proof plastic film package with foam protection in each corner
• Solid Seaworthy Wood Box Package with Steel Belt
• For the big machine, we will order the special container to load

Golden Laser - Golden Service

Installation Service

Installation Services are available with all GOLDEN LASER machines. We will dispatch technician to The Buyer's factory for installation and preoperation of machines.

Training Service

Our technician is available to your factory and offer training of how to use our machines. As well, you may send your technician to our company to learn how to operate machines.

Quality Guarantee

We guarantee the quality of machine (e.g. processing speed and working performance is the same as the data of samples making). We sign the agreement with detailed technical data.

We arrange final test before shipment. We run the machine for a few days, and then use customer's materials for test. After making sure machine is the best performance, then ship out the machine.

The whole set of machine guarantee is 1 year. We offer flexible extended warranties to our clients if need.

Standardization of Service “212"

2: response in 2 hours
1: provide solution in 1 day
2: solve complaint in 2 days

"1+6” Complete Services Specification

Laser machines purchased from Golden Laser installation and maintenance, we provide “1+6” complete services.

One Installation Service “one-time" OK

Six Complete Services

1. Machinery and circuit check
Explain the functions of machine parts and ensure machine’s long-term operation.

2. Operating guide
Explain the use of machines and software. Guide the customer proper use, extend product life and reduce energy consumption.

3. Machine maintenance Labels Laser Die Cutting Machine
Explain the maintenance of machine parts to extend product life and save the energy consumption

4. Product Process guide
Depending on different materials, do testing to get optimal processing parameters to ensure the best quality of products.

5. Site clean-up services
Clean the customer site when service is completed.

6. Customer evaluation
Customers give the relevant comments and rating about service and installation personnel.

Welcome to contact Golden Laser by leaving a message below for more information. Your kindly reply of following questions will help us to recommend the most suitable machine for you as soon as possible.