Specifications

Saree Embroidery and Cutting Machine
1)Embroidery and laser cutting
2)Processed by computer software
3)Improving added-value

High Precision Saree Embroidery and Cutting Machine

Applications:

Suitable for various fabric with embroidering, edge-cutting, punching, embroidered patch, hollowing, engraving and kiss-cutting.

Suitble for clothing embroidery, fabrics, Saree, multi-layer veil embroidery, label embroidery, plush toys, embroidery applique, knitwear, leather goods, textile products and fabric decoration.

 

Main Features:

• Stable structure and graceful appearance with LASER BRIDGE.
• Combination of computerized embroidery and laser high-speed cutting/engraving, precise cutting, increasing efficiency.
• Process various fabric with embroidery, edge-cutting, punching, applique, hollowing, engraving and kiss-cutting.
• Enriched the embroidery technology, highly improved the products level and added-value.
• Servo motors, high-quality lenses and dynamic focusing system configuration to ensure the processing of high speed and quality.
• The series has two models of single phase and double phase, no limit on embroidered heads, share one laser system, more cost-effective.

 

Main Technical Parameters:

Laser power	150W
Power control accuracy	0.1W
One field cutting area	450mm X 450mm
Non-loading Cutting Speed	0-300000mm/min
Bridge maximum moving speed	500mm/s
Format support	AI, BMP, PLT, DXF, DST, etc.
Power supply	AC220V, 50HZ
Laser power adjustment	0-100% following control of laser adjustment
Motion control system	Offline EMS memory continuous movement, 3-axis dynamic galvanometer system
Cooling system	Water cooling
Control mode	Separated computer embroidery and laser cutting system, freely switch-control
Embroidery machine quantity selection	1set, 2sets or 4 sets
Auxiliary system	Exhaust system
Control software	Original Golden Laser embroidery and laser cutting system software

 

Ten times profit higher than traditional embroidery:

-Take this design for example, if the laser bridge is for one phase 20 heads embroidery machine, laser process 15 minutes to finish.

-The original fabric cost USD1.2/meter. After embroidery, the embroidered fabric cost USD1.6/meter. After laser bridge process, it can increase the added-value as USD10/meter for profit.

 

Embroidery machine STANDARD:

A. One phase laser bridge for 9.6 meter, 24embroidery heads, 6 needles, 300mm head distance, X=600mm, Y=850mm;

B. Two phases laser bridge for 20 meters, 0.8m working table between two sets machines;

C. The embroidery machine can be flat embroidery machine, sequin device, cording device, coiling device, etc.

 

Cooperation Mode:

A. Laser bridge supplying as whole system, provides embroidery machine and laser bridge system entirely;

B. Laser bridge installation on the existing embroidery machine in customer’s factory.

C. Laser bridge installation in domestic Chinese embroidery factory.

 

More detailed Pictures of this machine:

 

Samples of Laser Bridge with Computerized Embroidery: