High Frequency Welding Hot Air PVC Fabric for Inflatable Factory
1, we use automatic computer chip tracking to control the temperature, the accuracy is ± 1°C.
2, we use computer chip to control welding speed, two motors to control upper and lower roller, so the speed of the two roller can be same and also can be different.
3, Protection device, soft start when machine starts heating up, automatic time delay switch will turn off the machine when it stops heating.
4, all automatic microcomputer control of machine, we can programme the machine according to customer’s requests, easy operation, stable performance and low failure rate are guaranteed
5, There is an adjusting device between the hot air tube and the rollers so as to avoid any missing welding area.
6, We have a big working table design to supply enough space for large-size airship, tent and inflatable boats welding. hot air banner welding seaming
parameters: hot air pvc fabric welding
Model | HA-800 |
Power | 1800W |
Input power | 4KVA |
Voltage | 50HZ AC220V |
Temperature | 700 °C |
Working speed | 2.5m/min-18m/min |
Width of nozzle | 20-50MM (optional) |
Way of pressure | Air |
Air pressure | 6kg/cm 2 |
Upper roller pressure | 0.5kg/c square meter- 4.5kg/ c square meter |
Upper roller stroke | 20-30mm |
Diameter of roller | 81.5mmX20-50mm (optional) |
Width of roller | 20-50mm |
Welding width | 20-50mm |
Processor | Touch panel |
Machine dimension | L1600×1500×1800mm |
Weight | 1000kg |
Samples: hot air pvc fabric welding
Xiehe provide you with the most thoughtful services | |
1 | One year warranty and life long maintenance |
2 | Free training and instruction |
3 | Free replacements |
4 | 24 hours online service |
5 | Sending technical staff overseas |
6 | Customized is available |
Contact us Now !!!! | |