Specifications

Super quality CE RoHS 30w pir motion sensor led flood light
1. Voltage:85~265v
2. Power: 30w
3. Epistar
4, Sensi

Super quality CE RoHS 30w pir motion sensor led flood light

 

PIR sensor LED Flood light Instruction:

     Pyroelectric Infrared Sensor(PIR),the product is an energy-saving automatic switch, it adopts integrated circuit and infrared energy detector. It can be on when someone comes and off when leaves. Its performance is stable. It can identify day and night automatically. The light can turn on when someone enters detection field and trigger it, it can turn off automatically when leaves detection field .

 

Function:

• Can identify day and night automatically, the ambient-light can be selected, so it works at night automatically and stop in the daytime.
• Time-delay can be adjusted vary to the place.
• It mainly be used fitting with halogen lamp, but it also can be used alone.

 Parameters:

 

Model no.:	TF-FL-30S
LED Type:	Epistar / Bridgelux
Power:	1x30W
Input Voltage:	AC85-265V 50-60 Hz
Material:	High strength aluminum + Tempered Glass
Shell color:	Black / Grey
Beam angle:	120°
Color Temperature:	2700-7000k
Luminous Flux:	3000lm
CRI:	Ra> 85
Dimension:	114 x96x 87.5mm
Lifespan:	50,000 hours
Working temperature :	-25 ~ 45°C
IP Rate:	IP65
Warranty:	3 years
Certificate:	CE, RoHS

 

Sensor information:

 

Detection range	120°	Working temperature	-25°C~+45°C
Detection distance	12m	Working humidity	<93%RH(<24°C)
Input Voltage	110 ~130V/220 ~240V	Time-delay	Min:5sec Max:6min±2min
Rated load	1200W.max(220V/AC)	Ambient-light	<3Lux~2000Lux
	800W.max(110V/AC)	Installation	height:2m~4.5m

Product images:

 

 

PIR sensor LED Flood light / Features & Advantages:

• Advanced constant current driver.
• Professional thermal management.
• No noise or humming or flickering.
• No UV or IR radiation in beam, mercury free.
• Anti-shock, anti-moisture.
• Extensive application, simple, safe and convenient.
• Energy-saving 75% than traditional lamps.
• Approval with CE, RoHS certificates 
• Our products are admitted to worldwide.

installation instruction:

 

1. when installing connect line according to the right fig. 

N --–white

L –black
Red ( be from infrared sensor)
connect white and black with power
connect white and red with load for lamp, we have already connected the controller wire.

2. AC INPUT cable

Brown: Line

Blue: Neutral

Yellow-Green : Ground

Test:
1. After installation, please turn anti-clock wise the time knob(TIME) to the minimum and turn clockwise the light-control knob to the end (DAYLIGHT) before you switch on the power.
2. switch on the power, the light can be on after 30sec. After it turns off, make it to sense after 5~10 sec.
3. If all are under good condition, with time adjustment knob the light period can be adjusted according to your desire, with light-control knob ambient-light can be adjusted.