Best-selling good price hydraulic clutch release bearing

Clutch bearing:   ODM&OEM ARE WELCOME!

Application:

Linqing Xiangyang Bearing Co., Ltd  specialize in taper roller bearings,deep groove ball bearing, spherical roller bearings,cylindrical roller bearings,pillow block bearings,thrust ball bearings,thrust roller bearing etc.

In addition,we can customize according to customer's demands for various types of bearings.

Our Brand:SRBF,  WYP,  X&Y

Maintenance

In order to give full play to the bearing and maintain its long-term performance should be really good regular maintenance (periodic inspection).

Through appropriate periodic inspection, failure to achieve early detection, to prevent accidents in the first place, to improve productivity and economy is very important.

Custody

Bearing at the factory are coated with anti-rust oil and use the right amount of rust-proof paper packaging, as long as the packaging is not damaged, the quality will be guaranteed.

But long-term storage, to be less than 65% humidity, the temperature is about 20 °C under the conditions of storage on a shelf above the ground 30cm appropriate. In addition, the storage place should avoid direct sunlight or contact with the cold wall.

Clean

Remove the bearing inspection, the first recorded appearance with good photography and other methods. In addition, to confirm the remaining amount of lubricant and lubricant samples, and then cleaning bearings.

a, bearing coarse washing and cleaning of fine washing, and at the bottom of the container used in the metal grid.

b, coarse wash, brush, etc. used in the oil or grease clear adhesive material. At this point, if the rotation bearings in oil, foreign bodies, such as damage due attention to the rolling surface.

c, sperm washing, in the oil slowly rotating bearings shall be careful.

Often used as a neutral cleaning agents without water diesel or kerosene, is sometimes necessary to use warm lye. No matter what kind of cleaning agent used, filter should always be kept clean. After cleaning, immediately bearing grease coated anti-rust oil or rust.