Product Details

Specifications

MAGNETIC PLATE LIFTER
FULL ISO COMPLIANT
AFTER SALES SERVICE PROVIDED

MAGNET LIFTER

INTRODUCTION:

The quick, safe and easy way to lift ferrous materials and work pieces.

These are two Pole Permanent Magnetic Lifters. The two poles are at the bottom of the lifter.

These lifters use high grade Magnets for producing strong magnetic flux path through the two poles.

The lifter is placed on the MS flat/block that is to be lifted. The turn of the handle in its ON position with MS flat/block/cylinders (to be lifted) at the bottom ensures completion of magnetic flux path through the MS body.

The MS body gets attached to the lifter. The turn of the handle in its OFF position detaches the MS body from the magnetic lifter.

WORKING PRINCIPLE:

Permanent lifter is made up of two parts, such as permanent sucker and discharge device.

The permanent sucker is made up of permanent magnet and magnet-conductive plate.

The magnetic force wire generated by the permanent magnet will go through the magnet-conductive plate, attracted materials and form a closed circuit thus to achieve the purpose of lifting the steel materials.

It is suitable for being used to lift and transport magnet-conductive billets, plates and rounds in industries of mechanical engineering, metallurgy, shipyard, car factory, dock and etc.

DETAILED PRODUCT DESCRIPTION:

1. Small and most compact

2. No need of electricity and no dangerous form sudden cut off of electricity

3. No damage to contacting surface of lifted objects

4. The position of magnetism on/off switch is secured by a BUTTON

5. With a V shape slot through the center of holding surface, both round and flat steel objects be lifted

6. Safety factor of all types is 3 or 3.5 Minimum.

7. Lightly and ingeniously structured, easy for application, strong magnetic Attraction power and safe in handling.

8. Samples are available, prompt delivery and good after service.

BASIC TECHNIQUES:

Attach the permanent magnet lifter to suitably tested lifting equipment, using the body hook.

To attach the permanent magnet lifter to the item being lifting, simply offer the base of the unit up to a clean, grease free on the item.

Determine the load weight and centre of gravity as accurately as possible. Once in position, move the magnet level fully anticlockwise until it is held captive by the level lock. Once attached, rise and move the item to where it is required. Before lifting/moving, ensure the load is free and not restrained by fixings etc. Lift the load a nominal distance to check balance and security of the load. Use tag lines to control long or bulky load.

Specifications

PERMANENT MAGNETIC LIFTER
product model		Steel plate		Round steel		Br
Model (BASED ON RATED LIFTING)	safety factor	Roted force	Max pulling force	Roted force	Max pulling force	Br
100KG	3.0times	100KG	320KG	30KG	90KG	5%
200KG	3.0times	200KG	610KG	60KG	190KG	5%
300KG	3.0times	300KG	1000KG	100KG	330KG	5%
500KG	3.0times	500KG	1550KG	150KG	470KG	5%
1000KG	3.0times	1000KG	3100KG	300KG	950KG	5%
2000KG	3.0times	2000KG	6050KG	600KG	1800KG	5%
3000KG	3.0times	3000KG	9010KG	900KG	2550KG	5%