Brief introduction:

It is suitable for hopper scales, platform scales and other electronic weighing devices. Weighing monitor can connect up to 8 load cells. With functions of automatic zero tracking, manual / automatic encryption, digital calibration and configuration, weighing set-point , alarm and etc.

Technical parameters

1. Power supply: AC220V,-15%~+10%, 50Hz,±2%

2. Max. power consumption: 20W

3. Display: 6 blue VFD digital display

4. Button: 6 buttons for menu style / shortcut (with a touch-tone)

5. 1way input, single range: 0-30mV or 0/4-20mA.

6. Connected with 8 load cell 350Ω (0.5-3.0mV/V)

7. A/D transform: 24 Σ- ADC

8. Sampling frequency: Max. 100Hz

9. Analog signal output interface (AO): 1way AO output single: 4-20mA,

Accuracy: ±0.1%FS

10. Definable NW / GW signal output

11. Switch signal output interface (DO): 4 way definable normally open relay or transistor switching output.

12. Relay switch contact capacity:AC250V/DC24V, 1A

13. Transistor switch contact capacity:DC24V, 500mA

Definition: NW/ GW upper limit/caps/lower limit/lower limit alarm, overload alarm, calibration, load state, D11/D12/D13 signal output, communication settings, NW (GW) ≥

The set point, the set point A≤NW (GW)≤the set point B.

14. Switch signal input interface (DI): 3 way DI switch output.

    It can be defined as zero calibration, manual zero, manual tare, gross / net weight display switches.

15. Digital Communication Interface (COM):

COM1: RS232/RS485

COM2: RS485, Prpfibus-DP, Ethernet, CANBUS, Wireless Module (BST106-C21 optional) and etc.

It can be connected to IPC IPC / PLC, remote display, remote operating station, serial printers, wireless modules and etc.

16. Output power: DC5V,100mA.

17. Dimension: 160*84*188mm (W*H*D)

   Hole size: 150+3 × 75+3 mm (W*H)

   Weight: about 1.5kg,

   Operating Temp.: -10°C~+40°C; Storage Temp.: -20°C~+60°C; Relative Humidity: Not more than 85%RH; Defend grade: IP50.