Thermostat ceramics

Specifications

Product description:

1.Material: steatite ceramic or alumina ceramic;

2.Heat dry molding,these material has been to improved electrical perforamance and mechanical properties,heat resistance,performance, especially sensitivity to temperature.

3.The ceramics without crack, without burr,without pinholes,without gaps,without impurities, surface is smooth, dye absorption is passed;

4.The ceramic body is compact, Density ≥ 3.65g/cm3, high mechanical shock resistance.

5.Linear Dimension Tolerance ≤ ±0.015mm,Aperture Tolerance ≤ ± 0.02mm, Hole Deformation Size ≤ 0.01mm,Circumferential Deformation Size ≤ 0.1mm.

6.Insulation Resistance ≥ 100MΩ (have been checked by megohm in DC500V).

7.Dielectric Strength: AC2000V/50HZ/1min no breakdown phenomenon.

8.Linear expansion coefficient is slight,and less than 8.0 × 10-6mm /°C, and good for thermal shock performance.

9.Sintering temperature is 1700 °C, the use of a temperature not lower than 1300 °C, good corrosion resistance.

Application:

Widely used in different kinds of high temperature switch thermostat, electronic temperature switch and thermostatically controlled switch

Brief description for classic type thermostate ceramics

Capability show

Regular shipping methods

1. Via Intl' express;2. Sea freight; 3Air freight;