Solar Inverter / Hybrid PCU, buy Solar Hybrid Inverter PCU UPS 20kVA Solar home backup device for blackout and solar feed in 20kVA on China Suppliers Mobile

Product Details

Depar Solar Hybrid PCU 20kVA with Off-grid Inverter, UPS and Solar home backup device for blackout and solar feed in 20kVA

Smart Solar Selection based on built-in Real Time Clock

- For maximum utilization of Solar Power

- To get the optimum performance of the PCU for Max. Power Saving.

- To monitor abrupt weather conditions

Real Time Clock divides the dayin 4 Time slots:

- When Sun Rises (Increasing Intensity)

- During Afternoon (Stable Intensity)

- When Sun Sets (Decreasing Intensity)

- Night Time (No Sun)

It's Intelligent Hardware & Smart Solar Selection Algorithm tracks the sun position for MaximumUtilization of Solar Power for Maximum Power Saving based on Time Zone and following Inverter/Solar Parameters like:

- Battery Voltage

- Discharging AH

- Solar CurrentCapacity - TotalSolar Current

- Solar Coefficient (derived by previous day Solar Capability)

50/70 Amp. PWM / MPPT built-in Solar Charge Controller

- Inbuilt fully regulatedPWM / MPPT(optional) 50 Amp. / 70 Amp. Solar Charge Controller to get optimum utilization of Solar Power.

- Provision for Charging by Solar Power Only

- Maximum Grid Power Saving can be achieved by “Charging by Solar Power Only” Button

- Provision to maintain Battery Gravity

- For better battery performances they are charged at full 15V (adjustable) level once in a month to maintain the gravityand prevention from deep discharge conditions.

Provision for setting of Critical Parameters as per user requirement

- Time (in a separate menu) - Boost Battery Voltage

- Battery Low Cut Voltage - Solar Low Batt. Low Cut Voltage

- Solar Max Charging Current - Mains High Charging Current

*Solar KWH on digital display

* Priority to Solar Power

* Remote Monitoring & Controlling of the UPSSystem through Wi-Fi / LAN / GPRS / Android App.(Optional)

Description	Specification
About Technology
Type of Inverter	TRUE HYBRID (Dual Input Source DC Type)
Nominal Rating	As Per Annexure
Max PV input Power	[50.0 Amp x (Specified Vdc x 1.5)] Wp
Control type	MOSFET
Power Control	PWM
Output Phase	1 Phase
DC current isolation	By Inbuilt Transformer
Grid Terminal	Appropriate rating terminal out for plug-IN
Solar Terminal	Power Terminals 80 Amp.
Operating Parameters
Solar Input Voltage range	[1.083 x Specified Vdc] to [1.666 x Specified Vdc] V
Max Solar DC Input Voltage	[1.83 x Specified Vdc] V
Max Dc Solar current	50 A
Input Grid AC voltage Range	UPS:-180 - 260 V, INV:- 100 - 280 V
Input Grid AC frequency Range	50 Hz ± 1.0 Hz
Output Voltage @ Batt. Full Charge	200 - 220 VAC
Wave Out type	pure sinusoidal
Total harmonic distortion (THD)	< 3 % for Resistive Load
Output frequency	50 Hz (±1.0 Hz)
Charging Method	Active Advance Battery Voltage dependent with multi controls for ripple free Charging
No-Load Loss	As Per Annexure
Overload Capacity at <= 120 %	5 sec
Overload Capacity at > 200 %	Immediate trip
Peak efficiency	≥ 85 %
Working Conditions	Temperature : 0 deg C to + 45 deg C, Humidity≥: 95 %
Noise emissions (dBA)	< 50 dB at 1mtr
Maximum operating altitude	1000 mtr
Protections
Surge Protection	Available
Reverse polarity protection for Battery	Available
Reverse polarity protection Solar	MOSFET based
Battery Protection	Automotive Fuse/ MCB (Type C curve)

Grid Protection	MCB (Type C curve)
Load Protection	Automotive Fuse/ MCB (Type C curve)
Internal fault protections:-
1. Over temperature protection	Available
2. Over load protection.	Available
3. Short circuit protection.	Available
DC Under voltage protection Per Batt.	10.4 V +/- 0.3V
AC Under / Over voltage protection	UPS:-180 - 260 V, INV:- 100 - 280 V (With 10 V Hys.)
Audio warning/alarms	BUZZER with Back Light Color Change feature
Emergency off button	Push to OFF
Display on front panel	Customized LCD Display.

SYSTEMRATING	SPECIFIED Battery Volt	Max. No Load Loss	(NC) Charging A (Mains, Solar)	(HC) Charging A (Mains, Solar)	Net Size	Gross Size	Net Weight	Gross Weight
15.0 KVA	240 V dc	<= 192 W	12.0 A, 25.0 A	15.0 A, 32.0 A	275 x 475x 560	395 x 555 x 605	88.45	99.90
20.0 KVA	360 V dc	<= 288 W	12.0 A, 25.0 A	15.0 A, 32.0 A	275 x 475x 560	395 x 555 x 605	100.00	110.00
Accessible Parameters Via Operating Display
1. AC mains voltage				7. Faults Status
2. O/P Load in %				i) Overload
3. Battery input voltage				ii) Short Circuit
4. Battery Charging/ Discharging current (Bar Graph)				iii) Fuse Trip
5. Solar KWH used				iv) Over Temp.
6. Solar Status				v) Empty ‘Battery’ Blinking