WIRE DRAIN CLEANER

Economically priced manual unit for clearing blocked sinks or drains.

Featuring 1.5mm x 6mm x 3.5m in snake with a basin plug head, for entry through sink waste strainers

Material : 72B

Weight : 0.627kg per piece

Operation:
1,One hand holding the handle, loosen the stop spin screws , so that the steel wire can free expand .
2,Pull out steel wire then inserted into the mouth of pipe , in case of difficult stretching into or not, then the wire tighten the stop spin screws to the pipe outlet from the 8-10 cm (the sleeve of the roots to the pipe outlet), the hand of shake the handle to the pipe put some pressure, on the other hand clockwise turn away, steel wire access, and release stop spin screw ,using this way up into the obstruction.
3,When moving the plate feel slightly heavier , it will be filling the full water in the pipe, the object can be crushed . (Blending of water that washed away after crused, drain cleaner ) , in case of objects do not broken mix, that is put out steel wire and clockwise turn away at the same time, you can hitch out the unbroken object, drain cleaner completed .

4,After used, the dirty steel wire will be pull out and rinse with water, dry it and on the steel wire coated oil or cooking oil, then push the wire into dial in the future use.

Update Date:2011-6-22 04:48:05