High Quality Digital Cable Tester Price

High Quality Digital  Cable Tester Price

DESCRIPTION of RJ45 Network Cable Tester

• RJ45 Network tester consists of:
  • Cable tester Master unit
  • Remote Unit
• Colour: Grey
• Inputs/Outputs: RJ11 & RJ45

HOW TO USE an RJ45 Network Cable Tester

• Detach the master and Remote unit from each other
• Plug the jack e.g. RJ45 into the master unit (ma
• Plug the other end of the cable into the remote unit
• Turn on the Master unit by sliding over the switch to either
  • ON - normal test mode
  • S - slow automatic mode
• The tester now checks each of the 8 wires one after the other
• If wired correctly the sequence on both the Master and remote unit will be:
  • 1-2-3-4-5-6-7-8
• If the cable is:wired incorrectly then the sequence on the remote unit will be out of sync
  • 1-2-4-3-5-6-7-8
• or if there is a short then
  • no light will come on in the remote unit.
  • 
    

  • MODEL	CCTV Security Tester PRO
    Video Test
    Signal mode	NTSC/PAL (Auto adapt)
    Display	3.5 inch digital TFT-LCD ,960 x 240 resolution
    LCD adjustment	Brightness, Contrast, Saturation adjustable
    Video IN/OUT	1 channel BNC Input & 1 channel Output
    Video Output Mode	1.0 Vp-p
    Video Level test
    Level test	Video signals measured in IRE or mV
    PTZ controller
    Communication	RS232, RS422 simplex and RS485
    PTZ Protocol	Compatible with more than 20 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.
    Baud Rate	150,300,600,1200,2400,4800,9600,19200bps
    Video Signal Generation
    Color bar generation	Output one channel PAL/NTSC colorbar video signal for testing monitor or video cable.
    UTP CABLE TEST
    UTP cable test	Test UTP cable connection status and display in the screen. Read the number of the test box.
    DC12V 1A power output
    DC12V power output	Output DC12V1A power for camera
    Audio input test
    Audio input test	test the pickup and other audio equipments on the front-end
    RS485 data analyst
    Data Monitor	Captures and analyzes the command data from controlling device
    POWER
    Power Adapter	DC5V, 2A
    Battery	Built-in 3.7V Lithium polymer battery ,3000mAh
    Rechargeable	After charging 3-4 hour, working time lasts 12 hours
    Low Consumption	Energy saving technology
    General
    Working Temperature	-10°C---+50°C
    Working Humidity	30%-90%
    Dimension/Weight	176mmx94mmx36mm/340g