Specifications

fiber optic splice closure
1.Waterproof Dome and horison type
2.1 in 1 out,2 in 2out,3in 3 out,4 in 4out

fiber optic splice closure  

 

 

Components:Seal tape, Insulation tape, Nylon tie, optical cable heat shrinkable sleeve, mental hook, seal fittings, numeral bar, retaining ring
Environmental temperature: -40°C to +85°C

Optic property:The spare fiber coiled in the fiber emplacing device; the fiber connector won’t attenuate during the FOSC installation operation period.

 

Seal Performance: After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.

 

Re-encapsulation Performance:The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressureafter three times of repeat encapsulation

 

Voltage-resistance strength:Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.

 

Insulation resistance:≥2X10⁴MΩ

 

Span-life: 30 years.

 

It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network

 

Uses and properties:

 

It is belonged to open structure airproof tie-in system of machine pressure.

 

It isused for the protective connection between two or more optical cables

 

Suitable for single core fiber optic cable and ribbon fiber optic cable

 

Main Technical Indexes:

 

1.Airproof performance: Airing pressure inside

 

box100Kpa

 

,pointer immovability after 24 hours or no air bell within 15min when parked in the common temperature water.                  

 

2. Re-encapsulation performance: no change in the index of air-proof performance after three times of repeat encapsulation

 

 

Item	HYG FOCS-6
Sheath size(h×diameter)	510mm×230mm
The maximum capacity (core)	144 core
Fiber optic cable quality of import and export	6
cable diameter	23mm(max)