Factory supply pulling eye LZSH optic patch cord for network solution and project
Applied range
1 Optical fiber communication system
2 Optical access network
3 Optic-fiber Date Communication
4 Optical-fiber CATV
5 A local area network (LAN)
6 Test Equipment
Order informations
HYG-ST/ PC – ST/ PC/ SM/ 2C/ 3.0 – 1M
1 2 1 2 3 4 5 6
1 Connector types: FC, SC, LC, ST, MTRJ, MU, MPO, DIN, D4, SMA
2 Ferrule End-face: PC, APC
3 Fiber Type: Single-mode (SM: 9/125um), Multimode (MM: 50/125um or 62.5/125um)
4 Cable Quantity: “2C” means duplex,C means simple
5 Cable Diameter: 3.0mm, 2.0mm, 0.9mm
6 Length:1, 2, 3 meter or customized length
7 Cable type: PVC, LSZH, OM3, OFNR, OFNP, Plenum
Technical parameters
1 The min bending radius: 3.8 cm
2 Operating temperature range: - 40 ~ 85 °C
3 connector materials: ceramic plug core
4 Min bandwidth: 200 MHZ. Km / 850 nm, 500 MHZ. Km / 1300 nm
5 Repeat plug: < 0.2 dB, each 500 times plug
6 Min reflection loss: 20 db
7 Max return loss:-50dB
Using methods:
Pull ring type optical fiber patch cord, generally used for field bad environment, the reliability of the device to request a higher place, this product is pull-tab design, the use of plastic transparent casing ring optical fiber connector end and in the end make pull-tab type, which fiber optic jumper in the construction process can have the effect of long distance traction, protect the fiber connector is not damaged, and improve the efficiency of wiring.
Other detail about FO pull patch cord:
