hdmi to sdi converter/hd sdi converter for the base station
USD $28.92 - $460 /Pair
Min.Order:2 Pairs
Shenzhen Haiyu Optics Communication Equipment Co., Ltd.
HDMI to SDI Converter(HYG5831)
Overview
This is a high quality video converter, the signal of the HDMI or the DVI can be converted to HD/SD-SDI signal with high quality. You can add SDI outputs to video cameras with HDMI connections, or add SDI outputs to computers with HDMI compatibility.
It is mainly applied to the broadcast system, high-speed rail, distant transmission of the military signals and other fields which require high definitions.
Features
1. High standard SDI output and accurate audio embedding ensure the signals meet the broadcast requirements.
2. Compatible with DVI and HDMI format.
3. Standard audio SRC; the 48K sampling rate can achieve phase locked.
4. Both the HDMI audio and external audio are can be embedded to SDI signal, the embedded channel is selectable.
5. Supports up to 1080p resolution and compatible of HD/SD video backwards.
6. Supports conversion from 1080P to 1080i for the convenience of the transmission and monitoring.
7. Supports the DVI resolution signal input.
8. WEB page control with no need of the trivial control software installation.
9. Adopts the innovative detachable installation part, this unit can be installed on the rack or the wall.
10. Supports EDID detection.
11. Status memory when restarted.
Specifications
Interface: Digital Video: 1*HDMI
Analog Video: 3.5mm stereo
Input Resolution:
1920*1080, 1920*1200, 1680*1050, 1600*900, 1400*1050, 1440*900, 1366*768, 1360*768, 1280*1024, 1280*960, 1280*800, 1280*768, 1280*720, 1152*864, 1024*768
Video Standard:
SMPTE-259M; 270Mbps
SMPTE-292M; 1.485Gps
SMPTE-425M; 2.97Gps
Supported Format:
3G: 1080p 50/59.94/60Hz;
HD: 1080p 24/25/30Hz; 1080i 50/59.94/60Hz; 1035i 50/59.94/60Hz; 720p 50/59.94/60Hz;
SD: NTSC 59.94Hz; PAL 50Hz
Video Output: 1*HD-SDI, BNC
Impedance: 75ohm
Power: 12V/5V DC
Control:RJ45
Dimension: 16*10cm
Ordering Information:
HYG5831 HDMI-SDI Converter
hdmi to sdi converter/ rs485 to fiber optic converter / hd-sdi fiber converter
technical parameters
Standard protocol | LEEE802.3Fast Ethernet 100Base-T/100Base-FL |
Network protocol | CSMA/CD |
connector | 1*UTP RJ-45 and 1*SC/ST/FC |
indicator light | PWR/FDX/FX LINK/TX LINK/TX LINK/TX ACT |
manner of working | Full-Duplex/Half-Duplex,with Automatic negotiation function |
transmission rate | 10M/100Mbps |
Transmission mode | Pure forward |
Power supply parameters | INPUT:110-260V AC or 48V DC |
ambient temp | -40°C~+65°C |
RH | 5%~90% |
hdmi to sdi converter/ rs485 to fiber optic converter / hd-sdi fiber converter
other pectures about our converter: