High Desk Strapping Machine
USD $250 - $1,000 /Set
Min.Order:1 Set
Dongguan Ming Ye Packing Materials Co., Ltd.
High Desk Strapping Machine
Features:
1) Strap quickly with high efficiency
2) Only takes 1.5 seconds for strapping one polypropylene strap
3) Instant-heating systems
4) Low voltage: 1V
5) Safe
6) Will be in the best strapping state in 5 seconds after you start the machine
7) Automatic stopping devices save electricity and make it practical. The machine
will automatically stop and be in standby state when you don't operate it beyond
60 seconds
8) Electromagnetic clutch, quick and smooth
9) Coupled -axle transmission, quick speed, low noise, low wear and breakdown rate
Specifications:
1) Model: XT-8020
2) Power supply: 220V/110V, 50Hz, 1-phase
3) Power: 0.66kW
4) Max. shrinking force: 60kg
5) PP tape width: 6-15mm
6) Min. strapping article: 60mm
7) Max. strapping article: no limit
8) Strapping speed: 1.5sec/strap
9) PP tape paper core: 200mm
10) Dimensions: 895 x 565 x 730mm
11) Weight: 100kg
Technical Specifications:
Model | KZB-1 | KZB-2 |
Strapping tension | 5-38kgs | 5-38kgs |
Strapping speed | 1.8Sec./Strap | 1.8Sec./Strap |
strap width | 6-15mm | 6-15mm |
power supply | 110V,220-240V/50-60Hz,1 Phase | 110V,220-240V/50-60Hz,1 Phase |
Power consumption | 250w | 250w |
Machine Size | 895*580*730mm | 1470mm*580*505mm |
Machine weight | 100kg | 80kg |
Gross Weight | 120kg | 100kg |
Dimension |
Technical Characters of Strapping Machine:
1. It used PCB control system: Ease to maintenance and replacement.
2. High efficiency strapping speed: Only takes 1.5-2seconds for one polypropylene strap.
3. It used instant-heating systems: The machine will be in best strapping state within 5 seconds after you start the machine.
4. The machine will automatically stop and be in standby state when you don't operate it beyond 60 seconds.
5. Electromagnetic clutch and Coupled-axle transmission: High-speed, low-noise and smoothly.
6. The high and the low type can be changed by hand: If you want change the high table into low table, you just move the strap plate from the interior of the machine to the right-hand side of the machine, and replace the 4short legs and the brake lever. Reverse the above procedures, you can change the low table into high table.
7. The height of the machine can be adjusted according to the height of the operator and the working demands.
Options:
1. Mechanical tension or electronical tension is optional
2. Outside tension arm or inside tension arm is optional.
3. Safety stop switch.
4. Our machine’s table height, voltage and the dimensions can be adjusted as per your requirements.