Specifications

The machine can produce air bubble film with LDPE and LLDPE or recycled material with good quality.

Introduction of Air Bubble Aluminized Film Laminated Machine.

 

1. Main parts: two extrusion parts, two electrical control parts,one aluminized film unwinding units, forming part and winding part.

2. Be able to produce five layers air bubble film. 

3. Same natures with air bubble film machine, this machine can produce two or three layers air bubble film, can laminate the bubble film with aluminum film, brown paper and other with PE thin film into four layers laminated films with special use. 

• Section of 5-layer air bubble aluminum film

 

4. Adopting Japanese "Nano" technology and high density, anti high temperature silica rubber roller to laminate film, the film will not stick to the rubber roller, pressing film smoothly, good laminated result to the brown paper and aluminum film. 

5.. Be able to manufacture various specifications of bubble between Φ6mm and Φ30mm and forming mould with different heights. 

6. Be able to manufacture various width specifications of air bubble film machines between 1000-2500mm. 

 

• Final production of machine

          

 

Technical Parameter

 

Model	MX-W100FA	MX-160FA	MX-200FA
Max. width(mm)	1000	1600	2000
Screw diameter(mm)	φ55	φ65	φ75
Output(kg/hr)	65-120	108-160	135-210
Line speed(m/hr)	700-1300	700-1300	700-1300
Total power(kw)	131	174	220
Comsuption power(kw)	40-47	55-65	70-80
Layer	5	5	5
Weight(kg)	6800	8400	10600