Polyurethane adhesive for Aluminum Honeycomb Sandwich Panel 

SPC-1003 TYPE TWO-COMPONENT POLYURETHANE ADHESIVE  

APPLICATION INSTRUCTION:
1. Mixing component A and component B completely by motor stirrer. Mix ratio of A and B is 5:1~4:1 by weight.
2. Clean the target material surface. Ensure no water or putty on the surface.
3. Evenly spread the adhesive, about 150~300 g/m2 with zigzag scraper of 5mm teeth space and 4mm teeth    depth. Or spreading with roller. If making honeycomb sandwich panel, spreading more glue.
4. Cover the material with raising pressure for 60 minutes until the adhesive solidified.
5. Sealed store in a cool and dry place, avoid contact with water.
6. Storage temperature is 5℃~30℃. Shelf life is six months.

Note of polyurethane adhesive:

  1. Must press the target material within the adhesive active period, but not 

  after the solidifying;

  2. Press time: about 4 hours in summer, 6 hours in winter, 24 hours  

  to reach the best intensity. To short the time, some water can be  

  sprayed on the adhesive.

 Storage of polyurethane adhesive:

 Stored in warehouse or indoor, keep sealed, shelf life is not less than 6  

  months.The rest glue should be sealed with cover to avoid solidification.

contact

 

MS. Emily Lu
QQ: 1780185492
Skype: chinaeps1 
WeChat: Emily19920909 
E-mail: sales (at) puglue (dot) com

              emily (at) puglue (dot) com
Website: