Product Details

12D ss wire pulling machine

1. Usage for LY- Stainless Steel Wire Drawing :

2. Main Features:

1. Two motors can precisely control the spool wire tension to reduce the slip ratio of wire to a minimum manner. 2. Transmission by timing belts. 3. Lubrication by water immersion.

3. Technical Parameter:

Power Control	Dual frequency conversion control
Most modulus	12
Inlet wire diameter	Φ2.0mm—Φ1.5mm
Wire finished diameter	Φ1.0—Φ0.50 mm
Maximum line speed	MAX300MPM
Slip ratio	15%
Constant speed capstan slip ratio	13%
Host body structure	Welded steel
Capstan	Spray tungsten carbide Capstan
Drawing motor	22KW
Take-up Power	5.5KW
Max.capstan diameter	Φ350mm
Fixed speed capstan diameter	Φ260mm
Take-up shaft dimensions	Φ300mm or according to customer specified
Take-up way	Top center screw tight type
Pay-off way	110W synchronous motor
Transmission	Timing belt drive
Take-up control	PID automatic control variable bit detection
Deflection detection device	Arm type
Tension adjustment method	Counterweight way
Maximum load	50KG
Drawing Lubrication	Full immersion
Brake	Electromagnetic brake
Bearing Lubrication	Oil-free
Voltage	380V 50HZ or specified voltage
Drawing oil	40 liters / min
Weight	2000KG

The drawing machine is used for drawing stainless or alloy wire .

After-Sale Service:

1: In order to help customers are able to operate the machine correctly, trainings on operation, maintenance and simple repair can be supplied if necessary. 2: Mechanical parts are provided one-year limited warranty, and electrical parts are six-month since the shipment date.