| EABJZ AUTOMATIC PUMP FOR BOOSTING SYSTEM | |||||
| PRODUCT PHOTO | PRODUCT SPECIFICATIONS | ||||
| Pump Inlet: | 1 inch | ||||
| Pump Outlet: | 1 inch | ||||
| Capacity Ranges: | 10 l/min to 80 l/min | ||||
| Head Ranges: | 10m -48m | ||||
| Max. Suction head: | 9m | ||||
| Power Ranges: | 0.37KW - 1.0KW | ||||
| Speed(RPM): | 2850RPM | ||||
| Pump Type | Pressure Switch (bar) | Pressure of Tank (PSI) | |||
| On | Off | ||||
| EABJZ055-H19 | 1.0 | 2.5 | 10 - 12 | ||
| EABJZ075-H19 | 1.0 | 2.5 | 10 - 12 | ||
| EABJZ100-H24 | 2.1 | 3.5 | 15 - 18 | ||
| EABJZ150-H24 | 2.1 | 3.5 | 15 - 18 | ||
| Production Standard (CE): EN 60335-1 : 2012 EN 62233 : 2008 EN 60335-2-41 : 2003 + A1:2004 + A2:2010 EN809:1998 + A1:2009 + AC2010 EN55014-1:2006 + A1:2009 + A2:2011 EN55014-2:1997 + A1:2001 + A2:2008 EN61000-6-1:2007 EN61000-6-3:2007 + A1:2011 EN61000-3-2:2006 + A1:2009 + A2:2009 EN61000-3-3:2008 | Max. operating pressure: | 0.6Mpa | |||
| Liquid Temperature: | -0℃ - 50℃ | ||||
| Material | Casing/cover | - Stainless steel ( SS304 / SS316 ) | |||
| Ejector union | - Engineering plastics (Noryl ) | ||||
| Diffuser | - Engineering plastics (Noryl ) | ||||
| Impeller | - Stainless steel ( SS304 / SS316 ) - Engineering plastics (Noryl ) | ||||
| Shaft | AISI420 (or wet part SS304, SS316) | ||||
| Shaft Sealing: | - Mechanical seal (Carbon/SiC/NBR/SS304) | ||||
| Bearing: | NSK or SKF | ||||
| Motor (Choice): | - Single or Three Phase - Insulation F - Protextion IP55 | ||||
| APPLICATION | |||||
| Self -priming centrifugal jet pump for water supplies (enve if mixed with gas) in small household systems, connected to autoclave tanks, for transferring liquids and emptying tanks; also used for gardening. - Floors of pressurized water supply - Small-scale booster system | |||||
