Specifications

remote control socket
1.newly design
2.good quality
uld be customized(like size ,color, finish etc.)
4.OEM

The product adopts digital IC coding and wireless emission and receiving technology.

The probability of repetitive code is very low. It has stable performance, long distance, good appearance, simple operation and long use life.

 

 

TECHNICAL PARAMETER:

Power source:emission:12V/DC            

receiving:230V/AC            

Power frequency:50~60Hz            

Frequency: 433MHz            

Distance:≥50m(wide place)      

Rated load:1200W(230V)

 

TEST AND USAGE:

1.before using, open the back cover of the emitter, fix battery into emitter according to the parameter;      

2.plug in the three receivers respectively, the green indicator on every receiver should shine;      

3.Press the No.1 emitter key, the receiver corresponding to the mark on the emitter key is on and the indicator turn red;      

4. Press the No.2 emitter key, the receiver corresponding to the mark on the emitter key is on and the indicator turn red;      

5. Press the No.3 emitter key, the receiver corresponding to the mark on the emitter key is on and the indicator turn red;      

6.After three receivers are on, press the emitter key again respectively, the corresponding receiver can shut off power, the indicator turn green respectively.      

7.If test is normal, button the back cover of the emitter. Connect the receiver socket with load and then you can use it.       Please attention: the distance between the three receivers can not be too short, otherwise that will affect the remote control distance, the distance between receivers should beyond 1m.

 

PROBLEM AND SOLUTION:

1.Press the emitter, the receiver hasn’t reaction

aplease check if the battery polarity is installed oppositely; bif the battery accords with the parameter;       cif the battery energy vanish       dIf the indicator of the receiver shine.       eif the indicator of the emitter shine

2. The remote control distance is short.

aif the distance between receivers is too short, which cause interfere each other.       bif the installation base of the receiver is metal       cif the power energy of the emitter is enough

Attention: To make the product performance more perfect, the product is renewed constantly. If you find difference between the product and the instruction, please give priority to the product, the instruction is for your reference.