Product Details

1-50 micron 40''high flow pp pleated filter cartridges China manufacturer/water filter replacement/water filter cartridges

Specifications:

Materials Of Construction	Filter Media:	Polypropylene
	Support Layers:	Polypropylene
	Micron Rating:	0.1, 0.2, 0.45, 0.65, 1.0, 3.0, 5.0, 10, 25, 50 um
	Inner core:	Polypropylene
	Outer Cage, End caps:	Polypropylene
	Seal Method:	Thermal Bonded, No Adhesives
	O-rings/gaskets:	Silicone, Nitrile, EPDM, Viton, Teflon, etc
Cartridge Dimensions	Outer Diameter	69mm(2.75'')
	Inner Diameter	28mm(1.12'')
	Length(based on DOE end caps)	10"- 254mm, 20"- 508mm, 30"-762 mm, 40"- 1016mm
	Filtration Area(m2)	0.65 m² per 10''
Operating Conditions	Normal Operating Temperature:	Up to 60℃ (140℉)
	Max.Operating Temperature:	80℃ (172℉) at P≤1.0 bar (14psi)
	Max. Differential Pressure
	Normal Flow direction:	4.2 bar (60 psi) at 25℃ (77℉)
	Reverse flow direction:	2.1 bar (30psi) at 25℃ (77℉).
	PH Value compatibility:	1-13
	Sterilization:	Steam Sterilization for 30 minutes at 121±2 ℃, Cumulative Time:15hours;
		Flush with hot water at 82℃(180℉) for 30 minutes, at P≤1.0 bar (14psi) -- Recommended.

Characteristics

Low differential pressure.

Low-cost.

High flow rates.

Long service life.

Ultrasonic welding and without adhesive.

100% integrity test for filter cartridge.

Widely filter precision and selectivity, available for various situations.

Broad chemical compatibility, and good chemical stability, acid-proof, alkali-proof, ethanol-proof, ketone-proof, DMF-proof, phenol-proof and other chemicals.

Certificate:

Packing: