Product Details

5" 10" 20" 30" Hydrophobic PTFE Membrane filter cartridge 0.2 Micron Vent Filter

Specifications:

Materials Of Construction	Filter Media:	Double-layer Polytetrafluoroethylene (PTFE)
	Support Layers:	Polypropylene
	Micron Rating:	0.1, 0.2, 0.45, 0.65, 1.0, 3.0, 5.0, 10, 25, 50 um
	Inner core:	Polypropylene
	Outer Cage, End caps:	Polypropylene
	Seal Method:	Thermal Bonded, No Adhesives
	O-rings/gaskets:	Silicone, Nitrile, EPDM, Viton, Teflon, etc
Cartridge Dimensions	Outer Diameter	69mm(2.75'')
	Inner Diameter	28mm(1.12'')
	Length(based on DOE end caps)	10"- 254mm, 20"- 508mm, 30"-762 mm, 40"- 1016mm
	Filtration Area(m2)	0.65 m² per 10''
Operating Conditions	Normal Operating Temperature:	Up to 60℃ (140℉)
	Max.Operating Temperature:	80℃ (172℉) at P≤1.0 bar (14psi)
	Max. Differential Pressure
	Normal Flow direction:	4.2 bar (60 psi) at 25℃ (77℉)
	Reverse flow direction:	2.1 bar (30psi) at 25℃ (77℉).
	PH Value compatibility:	1-13
	Sterilization:	Steam Sterilization for 30 minutes at 121±2 ℃, Cumulative Time:15hours;
		Flush with hot water at 82℃(180℉) for 30 minutes, at P≤1.0 bar (14psi) -- Recommended.

Hydrophobic PTFE gas filter cartridge

1) High flow rates and low pressure drop
2) High strength, long service life and cost-effective

3) Oxidation-resistant materials of construction for gas filters
4) Have a particulate removal rating of 0.01 μm in gases and a microbial removal rating of 0.22 μm in liquids

5) 100% integrity testable prior to release