.activated carbon cartridge filter  ,pleated paper filter folding filter cartridge,activated carbon block water filter cartridge

Description:                                                                                                                     

Swimming Pool water filter used imported paper, PCcore, filter element with high precision, large flow, pollutant carrying capacity, the initial resistance is small and suitable for all kinds of water filtration swimming pools and ponds.

   Multi-fold standard pool filter using polyester fiber filter media, with good mechanical properties and solar, and the center pin glued together from cover, folding design, filtration area increases, the overall gluing, cover seal good, high tensile strength, multi-fold filter with a long filter life, less the number of replacement filter cost and low cost, is widely used in resins, inks, paints, adhesives, purification, chemical agents, electroplating filtration, solvent and pharmaceutical filtration, filtration in food and beverage industries, particularly those with more widely used in swimming pool filters, also known as the pool filter.

Features:                                                                                                                         

- Pleated design increased surface area and contaminant removal

-- Longer filtration runs for fewer change-out and less maintenance

-- Low pressure drop

-- Designed for general water filtration purposes

The Cleaning Method of the Filter:                                                                               

Step 1. Lift the pool filter cartridge straight up to remove it from the pool filter body.

Step 2. Set the filter cartridge on the lawn and begin cleaning it with a garden hose. Use a full stray nozzle. A pressure nozzle may be too strong and will cause unnecessary wear on the pleated folds. When spraying, start at the top of the cartridge.

Step 3. Work your way straight down the cartridge to work the debris down and out the bottom of the pool filter cartridge.

Step 4. Rotate the filter cartridge to the next section and starting at the top work your way down again to the bottom. Continue rotating until the filter cartridge looks clean. Check inside the folds to make sure all the debris has been removed.

Step 5. Some of the debris will have collected at the bottom. Spend extra time spraying out the bottom.