Spec.

Description

Comment

LTE chip set

SQN3120 + SQN3140

Sequans

LTE Standard

3GPP Release9 CAT4

Host

AR9341

Qualcomm

Flash

16MB

SPI NOR Flash

DDR2 Memory

64MB

DDR2 SDRAM

Ethernet LAN Port

Four RJ-45 port

10/100 auto-sensing,auto-MDX

Four LAN Port

Voice POTS port

Two FXS RJ-11 ports

Optional Feature

USB Port

One USB 2.0 Type A

LED Indicators

Power/WiFi/Voice/Mode/Signal Strength/LAN Indicator

USIM

Support 1.8V/3.0V 2FF USIM

Power Switch

Power switch, mini rocker switch

Reset/Reboot Button

Tact switch

Touch reset functions within 1s completed; long press over 10s to restore the factory settings

WPS Button

Tact switch

WiFi Button

Tact switch

Control WiFi turn on or off

Power Supply

Input :Universal range 100~240V AC

Output:12V/1.5A DC

Index

Description

Dimension

167(H)× 187(W)× 44(T)mm

Weight

About 310g

Color

White or other customization color

Connectors

Description

ETH RJ45

Four LAN

POTS-RJ11

2 RJ11 interface, phone / fax / POS, providing VoIP functions under conditions of software support

USB Type

USB 2.0, can be switched to the LTE module directly

USIM Slot

Support 1.8V/3.0V USIM

Power

The Power port is where you connect the enclosed power adapter

Reset/Reboot

Touch reset functions within 1s completed; long press over 10s to restore the factory settings

WPS

Touch the WPS Button, WiFi successfully set

WiFi

Turn on or off WiFi Function

Functions

Support 802.11 b/g/n

Support FAT AP

POTS interface supports fax and POS (optional)

Users can manually modify the USIM card PIN code;

When the PIN verification, after the first manual check, follow-up support automatic verification;

After the PIN code input reaches the maximum number of attempts, USIM card will be blocked, and support the PUK code to unlock function;

Support modify the APN manually by WEB UI

Multi APN support, up to 4 APNs support

WEB UI support OS: Windows XP above SP3, Window 7, Vista, Linux.

USB2.0

1. Direct access the module

2. Upgrade module firmware from USB2.0 port

3. IOT test should use this port

WIFI Features

1. Users can switch WLAN function through two ways, one is touch the WLAN button, the second is Web UI.

2. Support configuration WLAN functions through Web UI, include: SSID, SSID broadcasting turn on/off, AP Isolate function, Channel, rate and mode

3. Support encryption: Un-encrypted, WEP-OPEN, WEP-SHARED, WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP), WPA2-PSK (AES)

4. Support WPS: Support PBC mode

5. WiFi protocol support: IEEE 802.11 b/g/n (2.401 – 2.483 GHz)

Device Management

Device management:Support TR069

1. Supports upload / download the ACS specified file; Support download CPE configuration file;

2. Support queries following parameters: PCI / RSRP / RSRQ / SINR / Transmit power / DL Packet Error Rate (PER) / MCS

Data rate in downlink and uplink / MIMO mode in progress

3. Support configure the following parameters: Wan Configuration: Operation Mode, WAN Protocol, Get IP Method, WAN IP Address, WAN IP Subnet Mask, MTU;

DHCP Server Configuration: DHCP Mode, Start IP, End IP, Lease Time, Relay IP;

DMZ configuration: DMZ Host; VOIP-related parameters;

4. Support remote upgrade: Support batch or for individual CPE remote version upgrade and rollback operations;

5. Support CPE version update

Router Functions

1. Support Router mode and Bridge mode;

2. Users can automatically obtain IP parameters through static IP or dynamic mode (DNS)

3. Users can automatically obtain IP address through DHCP;

4. Supports user devices via a switch connected to the Internet by CPE LAN ports, maximum number of connections no less than 32;

5. Support via a router device connected to the Internet by CPE

LAN ports.

VPN

Support VPN Pass-through

Support L2TP/IPsec/PPTP

Support PPPoE

Feature

Status

Comments

User Name/Password configuration

Support

Firewall Switch

Support

LAN MAC Filter

Support

IP Filter

Support

URL Filter

Support

L2/L3 Firewall

-Basic firewall

- Port Forwarding

-uPnP

-DMZ 

-Remote WAN Ping

-Remote Web Access Control

Support