cell culture bioreactor, buy Auto Control Bioreactor on China Suppliers Mobile

Product Details

Product Description

Name: Auto Control Bioreactor

Model: CELLIPOWER08 system MC/SS

Feature

Shanghai RITAI introduces a new generation of microcarrier Cell Culture Bioreactors. We adopt centrifugal lifting type Agitator, which has features of low shearing force, rapid solution circulation , shorter mixing time, and ability of linear scale up. And we adopt new type of aeration tube, which has features of foam free deep aeration, oxygen Transfer Rate (Kla between 4-8) satisfy.. Moreover, we also adopt unique decanting column, which has features of Simple structure, stable and reliable, Perfusion rate higher than 5 times of the working volume/per day, a self cleaning function and of features of liquid level being automatically controlled

Application

It suits for the culture of mammalian animal cell. It is also available for suspension culture, anchorage independent and anchorage dependent cell line. Continuous perfusion is applicable, it can increase cell density, improve the health pattern of cell, and greatly increase cell product.

Description

Model	CELLIPOWER08 SYSTEM
Working volume	5L -300L
Filling volume	65-80%
Material	Wetted parts are SS316L, and others is SS304.
Stainless steel part finish	inside surface is 0.28-0.6μm by mechanical polishing, ( passivation or electropolish are optional) outside surface is 0.4-0.8μm by satin finish.
Pressure	Working pressure inside vessel:0.2mpa Design pressure inside vessel: 0.25mpa Working pressure inside jacket:0.3mpa Design pressure inside jacket: 0.35mpa Pressure can be also designed according to client’s detail requirement.
Agitation	1.Fermentor use servo motor or SEW decelerator mechanical agitator , single mechanical seal 3.speed range:50-200rpm 4.Centrifugal lifting type agitator
Equips of vessel	1.using alcohol flame inoculation 2.electrical heater 3.PH,DO, temp. sensor foam and level probe port, etc.
construction	Floor type One fermentor vessel with one control system (simens PLC and HMI)
Operating panel	Chinese and English version
Main components and controls of system
PH	1.On-line check and measure, and digitization fully automatic control; 2.PH, CO2 and base gang control. Mass flow meter automatically adjusting CO2, peristaltic pump automatically adjusting base. 3.Control range 2-12pH, measure precision±0.01 pH, control precision±0.1 pH; 4. It has auto alarm function. 5.pH sensor and signal transmission line, mettler Toledo
DO	1.On-line check and measure; digital display. 2.Range 0-200%, precision ±1%; 3. It has auto alarm function; 4. DO sensor and signal transmission line, mettler Toledo
Feed controlperfusion	1.Automatically control and automatically alarm; 2.peristaltic pump automatically feeding and perfusion
Temp. control	1.PID fully digitization signal processing, digitization control settings 2.Measure range 0-150°C, control range 15-45°C,control precision±0.2°C 3.Pt 100Ωtemp. Sensor 4.system with electrical heater to control the temp inside vessel
Rotation speed	1.Automatically control , with auto alarm function 2.servo or simens frequency converter to adjust the speed.
Air flow	Automatically adjusting with massflow meter
Pressure	Automatically adjusting with pressure transmitter and pneumatic valves
sterilization	1.it can be SIP by connecting with steam 2.Automaticall control with pneumatic valves (optional)
Control	Siemens PLC, and Siemens 10.4” LCD touch screen(HMI) and RITAI program
PC	1.PC with kingview software for recording function (optional) 2.PC with simens remote control and kingview recording function (optional) 3.printer (optional)

Packaging & Shipping

Packaging: wooden case Shipping: by sea or by air

Our Services

We offer design, customization, manufacture, installation, and maintenance services, etc.