HK-1002 Pensky-Martens Closed-cup Flash Point apparatus by manual operation
USD $900 - $900 /Set
Min.Order:1 Set
Liaoning Huake Petroleum Apparatus Science & Technology Co., Ltd.
HK-1002B Automatic pensky-martins closed cup flash point tester
HK-1002B Full automatic ASTM D92 cleveland open (closed) cup flash point tester
HK-1002B Autoamtic Cleveland Open Cup And Pensky-Martins Closed Cup Flash Point
HK-1002B Full automatic open (closed) cup flash point tester for petroleum products
HK-BL101 Common Glass Container Verification Device (Volumetric Method)
HK-BL101 Common Glass Container Verification Device (Volumetric Method)
HK-1002 Closed-cup Flash Point Tester
(Pensky-Martin method)
Overview
HK-1002 Closed-cup flash point tester for petroleum products (Pensky-Martin method) conforms to the ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. It is used to test for those liquids which have a kinematic viscosity of 5.8 mm 2/s (cSt) or more at 37.8°C or 9.5 mm 2/s (cSt) or more at 25°C (77°F), or that contain suspended solids, or have a tendency to form a surface film while under test. Other classification flash points have been established by these departments for liquids using these test methods.
Technical parameters
1. Rated voltage: | AC220V±10% 50Hz |
2. Temperature range: | 40~300°C |
3. Heating power: | 0~1000W (Continuously adjustable) |
4. Agitation way: | Motor stirrer, 105r/min |
5. Ignition gas: | Pipeline coal gas, Liquid gas, and gas pressure less than 10Kpa |
6. Ignition way: | Ignition is controlled by hand |
7. Ambient requirement: | Temperature: 20~30°C Humidity≤85% |