Specifications

vitamin concentrate
Nitrogen concentrator instrument can concentrated dozens of samples simultaneously

SELON PBC96 SAMPLE CONCENTRATOR

vitamin concentrate
sample concentrator
gold concentrates for sale

Technical Parameters

Model	PBC96  96 holes nitrogen concentrator
Temperature range	RT+5°C to 150°C
Heating time	≤30min (40°C-150°C)
Temperature accuracy(40~100°C)	±0.5°C
Temperature accuracy(100~150°C)	±1°C
Temperature uniformity(100°C)	±0.5°C
Blocks Quantity	1 pieces
Time range	0.1
Nitrogen flow	99h59min
Nitrogen pressure	0—10L/min
power	≤0.1MPa
Dimensions	200W
Blocks Selection	280x220x400 mm
Temperature range	Refer to the “blocks replacement for  PBC96 Series”

 

 Conventional configuration

The user can select the blocks from PB16 and PB17, blocks can be interchanged, and conventional configuration is PB06 blocks.

 

Blocks replacement for PBC96 Series

Type	Tube diameter	Tubes	Block size (mm)
PB16	0.2ml centrifugal tube	96	78 x 114 x 26
PB17	Plate(no holes)	96 hole enzyme plates	81 x 123 x 19

PB16, PB17 is special configured for PBC96

 

Product Numbers:  PBC96

 

Product description:  PBC96 96 holes nitrogen concentrator is mainly used for enrichment of large-volume sample or preparation (such as drug screening, hormone analysis, liquid phase, and mass spectrometry in the analysis of sample preparation). Working principle: the nitrogen into the heated surface of the sample and make the solvent t evaporate and separated rapidly, thereby reaching the sample enrichment purpose without oxygen, keep the sample purer. Nitrogen concentrator instrument can concentrated dozens of samples simultaneously, saving time and high efficient, instead of rotary evaporation instrument

 

Product features

1, The heater allows samples to be heated rapidly to the evaporation temperature, through the gas blow to the solution surface via needle at the same time, prompting rapid evaporation and concentration solution.

 

2, The gas chamber height can be adjusted, the length of standard gas needle is 80 mm.

 

3, Each blow needle can be controlled independently, can be blown, separate flow regulation, no waste of gas.

 

4, The entire system can be arranged in the ventilation cabinet when process concentration of toxic solvents,

 

5, Built in over-temperature protection device, automatic fault detection and alarm function.

 

6, LED display, temperature and time diminishing display, the operation is simple and convenient.

 

7, configured standard gas chamber and special adjustable bracket.

Payment Terms
1. All the payments required before
2.30% deposit required before production, 70% balance before delivery.