Name: water activated tape insulation tape
Brand: Ansen
Availability: InStock

Product Details

**** water activated tape insulation tape ****

water activated tape insulation tape

* 13 years profesional manufacture Armor-wrap Fiberglass Pipe Repair Bandage

* FDA CE Certfication

* OEM your size and backing

* Various Colors for Choose

* 7-15 Working Days for Delivery

* Free Samples Offered for Test

Welcome to contact us

Sales: Linna Xiong

Email: linna@piperepair.cn

Tel: +86-29-85215708 Mob: +86-15929909062

Skype: linnaansen QQ: 513485808

What's APP: +86-15929909062

water activated tape insulation tape

Description:

water activated tape insulation tape

Pipe repair bandage is a fast curing tape composed of a flexible fiberglass mesh impregnated with water activated polyurethane resin.

Our pipe repair bandage uses environmental friendly materials, and mainly used for Repair Oil , Gas & Water Pipeline etc,and adheres to Metal, plaster, PVC, Copper, Rubber, Fiberglass, Concrete, Wood, Ceramic, Polyester, ect.

water activated tape insulation tape

Name	Model	Size	Packing
Pipe Repair Bandage	PR002	50mm x 3.6m (2" x 12´)	10rolls x 10rolls/ctn
	PR003	75mm x 3.6m (3" x 12´)	10rolls x 10rolls/ctn
	PR004	100mm x 3.6m (4" x 12´)	10rolls x 10rolls/ctn
	PR005	125mm x 3.6m (5" x 12´)	10rolls x 10rolls/ctn
	PR006	150mm x 3.6m (6" x 12´)	10rolls x 10rolls/ctn

water activated tape insulation tape

Outstanding Advantages

Technical Data

v Catalyst: Water

v Resin Makeup: Polyurethane

v Heat Resistance: 180°C

v Pressure: 450 PSI

v Bonds: Copper pipe, PVC, polypipe, metal, fibreglass

v Set Time: 20 – 30 minutes, sets under water

v Chemical resistance: Most diluted chemicals and fuels

♦ Useable life: …2-3 minutes, depending on temperature of water and pipework

♦ Intial cure time: … 5 minutes

♦ Full cure time: … 30minutes

♦ Shore D hardness: … 70

♦ Tensile strength: … 30-35Mpa

♦ Tensile modulus: … 7.5Gpa

♦ Maximum service temperature: … 150°C

♦ Pressure resistance: … 450psi (Min wrapping 12 layers around cracked/leaking area)

water activated tape insulation tape

Industry

Area of use

Reason for use

Steel Smelter Works

Processing: blast furnaces, water,

steam, waste product pipes

Emergency repairs until shutdown

Steel Sheet & Coil

Manufaturing

Processing: Steam and water pipes

Emergency repairs to burst pipes

Petroleum

Oil, gas, water supply lines

Emergency repairs to fuel,

oil and gas lines during 24hr shift

Coal, Copper & Zinc Smelter

Processing: blast furnaces, water, steam,

sludge, slurry lines

Emergency repairs

Sugar Mills

Corrosive fluid lines, abrasive product pipes,

general low pressure, water and steam lines

Emergency repairs to corrosive, water,

steam and abrasive lines

Aluminiume

Processing Plant: boiler rooms, sludge, slurry,

water, steam pipes

Emergency repairs to sludge

and chemical lines

Power Stations

Ash transfer systems, pulverized fuel tubes,

cooling water lines

Emergency repairs to transfer

systems and lines

Timber Mills

Processing of wood paneling,

ply and softwood

Emergency repairs to chemical

and water lines

Paper Manufacturing

Pulp Mill

Emergency repairs to chemical,

water and waste lines

Motor Vehicle

Manufacturing

Production manufacturing plant

Emergency repairs to leaking water

and steam pipe

water activated tape insulation tape

Application:

1. Once the leaking area is identified, shut down relevant pipes or hoses immediately.

2. Prepare the surface by cleaning and roughening the pipe.

3. Put on enclosed latex gloves.

4. Apply Steel Putty to the leak site and mould.

5. Open foil pouch and immerse bandage in temperate fresh water for 10 seconds.

The entire contents must be used once the package is opened.

6. Apply around the damaged area extending up to 50mm either side of the leak to ensure complete coverage.

It is important that the bandage is applied.

7. quickly as curing begins once it is taken out of the water.

8. Whilst wrapping, pull each layer tightly by using your hand to mould and squeeze the layers together.

Continue this action during and upon completion.

For best results, manufacturers recommend the completed application should be no less than 10mm in thickness. Please refer to the instructions for use on each bandage for a troubleshooting guide.

water activated tape insulation tape

Package: OEM service is available

water activated tape insulation tape

Shipping: within 15 working days after payment

water activated tape insulation tape

Exhibition:

water activated tape insulation tape

About us:

Ansen medical is the manufacturer with 13 years experience specializing in fiberglass pipe repair bandage ,emergency pipe repair bandage.......

Fast Pipe Repairing Armor Wrap Tape Cable Connection Repair Bandage

water activated tape insulation tape

Global Distribution System: