high barrier co-extrusion thermoforming film
USD $3,240 - $4,400 /Ton
Min.Order:1 Ton
Zhejiang Jinhu Packaging Material Co., Ltd.
1:Introduction of Co-extrusion Film
The seven layers co-extrusion film is Consist of PA, EVOH and PP/ PE etc. material, according to the different require of guests. Using symmetrical or unsymmetrical unitized construction. Because of putting in of PA and EVOH, it not only improves the barrier property of the multi-films to oxygen but also keeps the good smell of food, strengthen the performance of anti moisture and extend the storage period, because of achieveing the usage of every materials which are low cost. one-step forming process also makes the material has the advantage of solvent-free.the seven layer co-extrusion film also suitable for the package of the chemical raw material, food and medicine, because it has the advantage of anti-impact, anti-pierce and high strength. so it becomes the current flow of the new packaging way. Jinhu Packaging mateial CO.,LTD has the most advanced machines for producing the co-extrusion film. and seven or five layers are all ok,and they can be produced by upper blowing and lower blowing process in Jinhu Packaging material CO.,LTD.
2:The Advantage of the Co-extrusion Film
3:Items for Films
A:Item:Freezer Pouch and films
Application:Food such as meat,sausage,seafood,fruit,vegetables,cheese
Structure:Co-extruded 5 layer and 7 layer.
width can be:20cm-150cm
thickness can be:50microns-300microns
Material:PA/TIE/PA/TIE/PE/PE/MPE
PA/EVOH/PA/TIE/PE/PE/MPE
PA/TIE/PE/TIE/PA/EVOH/PA/TIE/PE
PE/TIE/PA/TIE/PA/TIE/PE
Type of Sealing: Bottom sealed ,3 side sealed and sealed with a drain tap
can be feed bag.
Certificate:SGS showing our good is complied with the FDA
Application1.Low Oxygen Transmission Rate
2.Low Water Vapour Transmission Rate
3.Fine Gloss
4.Can be contacted directly with food
5.Environmentally Friendly
6.Suitable for deep freezing down to -40°C .
7. Suitable for pasteurization up to 100°C.
B:Item: Retort pouch and Films
Application:Food such as meat with sharp bones in it and some meat which need to heat with micronwave oven or high pressure cooker without remove the pouch.
Structure:Co-extruded 5 layer and 7 layer
width can be:20cm-90cm
thickness can be:50microns-300microns
Material:PP/TIE/PA/TIE/PE/PE/MPE
Type of Sealing: Bottom sealed ,3 side sealed and sealed
Certificate:SGS showing our good is complied with the FDA
Application1.Low Oxygen Transmission Rate
2.Low Water Vapour Transmission Rate
3.Fine Gloss
4.Can be contacted directly with food
5.Environmentally Friendly
6. suitable for pasteurization up to 121°C.