Coating Thickness Gauge & portable coating thickness gauge CQ-X6

Composite coating measurement for all metals. Depending on the substrate may be, each time the display readings, while the letter Fe (magnetic metals, such as iron, steel) or NFe (non-magnetic metal, such as aluminum alloy). Compound thickness can automatically identify the substrate.

Operating

Power reduction starts automatically start the measurement probe, still 30 seconds, the power is automatically turned off.

The probe is flat and measured thickness (coated) substrate surface, predict with confidence, when the measurement is completed, thickness tweet, pick gage readings are displayed. Out of range display symbol "- - - -."

CQ-X6 thickness, 1.8-inch TFT screen, also shows the maximum measurement process, minimum, average and error.

UVLED

Tap the "+" button once, open UVLED, and then tap the "+" button once, close UVLED.

LED

Tap the "-" button 1, turn on LED, then tap "-" button once closed LED.

Color conversion

Press "+" button for 2 seconds, can transform the display font color.

Is highlighted

Press "-" button for 2 seconds, can display 180-degree turn.

Unit switch

Tap "M" button 2 times, the buzzer sounds, complete the conversion "um" and "mil" between.

Calibration

a. uncoated calibration

Tap "M" button three times, the screen displays "00", the buzzer "beep, beep, beep ..." sound, this time, the gage probe flat on uncoated substrates tested surface, predict with confidence, thickness tweet, the screen displays "0", pick up the gauge, complete uncoated zero.

b. standard film calibration

Measurement standards slice, tap "M" button once, the buzzer "beep, beep", the current measurement data flash 2 times, then press "+" or "-" button to consistent readings raised the standard sheet Finally, the tap "M" button once, the buzzer "beep" once confirmed modify data.

c. Restore the factory parameters

Press the "+" or "-". "Beep, beep, beep" button, buzzer sound when you release the button to complete restore factory operations.

Clear the maximum, minimum, average and error values

Tap "M" button 4 times, the buzzer "beep" sound, clear maximum, minimum, average, and the measured error value.

Low battery alarm

When appears on the screen when "" the measured values may not be accurate, please replace the battery.