hydraulic lift/4 post lift/automotive service withCE/factory lift
USD $2,500 - $3,300 /Set
Min.Order:1 Set
CNBM International Corporation
Main Features
1. Single hydraulic cylinder drive.
2. Manual release from one side.
3. Mechanical safety latch in four columns' back
4. Adjustable distance between two platforms can be well applicable to vehicles of different width.
5. Automatic stop in the highest position.
6. Anti-surge valve that equipped in hydraulic joint ensures no danger in case of oil hose broken.
7. Relief valve protect against overloading.
8. Valid protection system for steel cable broken.
9. Front and rear positioning wheel stop.
10. Suitable for four-wheel alignment.
11. "UP" "DOWN" "EMERGENCY " button on control panel,simply operation.
12. 24V low-voltage safe control keeps customers away from enexpected injury.
13. CE Certificated.
Specification
Item No. | 4CMFL3.5 | ||
Lifting capacity | 3500 | ||
Lifting height | 1800mm | ||
Minimum height | 220mm | ||
Overall height | 2240mm | ||
Overall length | 5870mm | ||
Width between columns | 2340mm | ||
Overall width | 3220mm | ||
Runway width | 530 | ||
Lifting time | ≤60s | ||
Lowering time | >30s | ||
Motor | 220V/380V 50Hz/60Hz 1Ph/3Ph |