Gasoline(LPG) forklift
Negotiable /Set
Min.Order:1 Set
Shanghai Sinolift Equipment Co., Ltd.
General | Manufacturer |
| SINOLFIT FORKLIFT | |||||
Model |
| CPQ(D)10-WF CPY(D)10-WF | CPQ(D)15-WF CPY(D)15-WF | CPQ(D)18-WF CPY(D)18-WF | ||||
CPQ(D)10-H1 CPY(D)10-H1 | CPQ(D)15-H1 CPY(D)15-H1 | CPQ(D)18-H1 CPY(D)18-H1 | ||||||
CPQ(D)10-R CPY(D)10-R | CPQ(D)15-R CPY(D)15-R | CPQ(D)18-R CPY(D)18-R | ||||||
Power type |
| Gasoline LPG | ||||||
Rated capacity | kg | 1000 | 1500 | 1750 | ||||
Load center | mm | 500 | ||||||
Dimensions | Lift height | mm | 3000 | |||||
Free lift height | mm | 164 | ||||||
Fork size | mm | 920×100×40 | 920×100×40 | 1070×120×40 | ||||
Mast tilt angle | deg | 6/12 | ||||||
Front overhang | mm | 436 | ||||||
Overall Dimensions | Overall length | Without fork | mm | 2180 | 2235 | 2270 | ||
With fork | 3116 | 3171 | 3356 | |||||
Overall width | Wheel width | mm | 1095 | |||||
Frame width | 1080 | |||||||
Mast lowered height | mm | 1995 | ||||||
Mast extended height | mm | 4038 | ||||||
Overhead guard height | mm | 2075 | ||||||
Turning radius | mm | 1890 | 1960 | 2000 | ||||
Min. right angle aisle width | mm | 1720 | 1780 | 1820 | ||||
Performance | Travel speed | Hydraulic | km/h | 14.5/13.5 | ||||
(no load/full load) | Mechanical | Shift | 6/5.5 | |||||
| Shift | 14/13.5 | ||||||
Lift speed (no load/full load) | mm/sec | 510/450 | ||||||
Wheel & Tires | Tires | Front |
| 6.50-10-10PR | ||||
Rear |
| 5.00-8-8PR | 5.00-8-10PR | 5.00-8-10PR | ||||
Tread | Front | mm | 890 | |||||
Rear | mm | 920 | ||||||
Wheelbase | mm | 1400 | ||||||
Ground clearance(full load/no load) | Mast | mm | 95/105 | 85/105 | ||||
Frame | 105/115 | |||||||
Drive units & control | Engine | Apply to truck model |
| CPQ(D)10/15/18 -WF | CPQ(D)10/15/18 -H1 | CPQ(D)10/15/18 -R | ||
CPY(D)10/15/18 -WF | CPY(D)10/15/18 -H1 | CPY(D)10/15/18 -R | ||||||
Model |
| WANFENG 491GP | NISSAN H20 | MITSUBISHI 4G64 |