Specifications
1.Tungsten carbide end mill2.Bright, TIN-coated, TiALN
3.DIN844 standard
4.2-6 flute and single flute are available
DIN844 Tungsten Carbide End Mill
1.Tungsten carbide end mill
2.Bright, TIN-coated, TiALN
3.DIN844 standard
4.2-6 flute and single flute are available
Product Description:
Standard: | DIN844 |
Manufacturing Process | Fully ground, Milled |
Material: | Micro-grain tungsten carbide |
Flute Number: | 2 Flute; 2-6 flute and single flute are available. |
Surface Finish: | Bright finish, Tin-coated, TiALN |
Application: | It is used for milling & cutting for ordinary steel, alloy steel, die steel and cast iron etc. Have taper shank and straight shank for choice. With long type, extra long type and normal type. |
Outer Diameter | Shank Diameter | Flute Length | OAL | R | Z |
2 | 4 | 4 | 50 | R1.0 | 2 |
2.5 | 4 | 5 | 50 | R1.25 | 2 |
3 | 4 | 6 | 50 | R1.5 | 2~3 |
4 | 4 | 8 | 50 | R2.0 | 2~4 |
5 | 5 | 10 | 50 | R2.5 | 2~4 |
6 | 6 | 12 | 60 | R3.0 | 2~4 |
7 | 8 | 15 | 60 | R3.5 | 2~4 |
8 | 8 | 16 | 60 | R4.0 | 2~4 |
9 | 10 | 18 | 75 | R4.5 | 2~4 |
10 | 10 | 20 | 75 | R5.0 | 2~4 |
12 | 12 | 24 | 75 | R6.0 | 2~4 |
14 | 14 | 25 | 80 | R7.0 | 2~4 |
16 | 16 | 30 | 90 | R8.0 | 2~4 |
20 | 20 | 35 | 100 | R10.0 | 2~4 |
25 | 25 | 40 | 120 | R12.5 | 2~4 |
TONGYU's philosophy is based on three principles: safety, efficiency and precision.
Pls. contact us freely for more information, I will reply you ASAP!
Hope you will enjoy a comfortable cooperation with us!