Best Energy-saving Multifunctional used wood pellet making machine with 150-200kg/h machine wood pellets HW-250

The product's installation and adjustment and preparation before use 
1, the installation: 
Install the ground should be flat, dry, electrical parts should be required wiring, wires and wiring must be well insulated at all sides of the fastener must be solid and reliable, the spindle rotates to the direction of the standard must be consistent with the machine after the installation of the moving parts should be rotated flexible. 
2, the adjustment: 
(1) die wheel gap adjustment: by adjusting the ear seat two hex bolts to adjust (usually a gap of 0.1-0.3 mm).

(2) the adjustment of the knife, loosen the upper screw feed opening, the vertical position of the cutter can be adjusted. 
3, the use of preparation: 
(1) before using the machine for thorough cleaning work, check the connection between the components and the rotation is reliable. 
(2) Check the power supply meets the requirements, then connect the power to regulate the direction of spindle rotation consistent with the mark.

Pictures as follows:

Other types you may have interest in

1.The minimum order is one set ,you can delivery by sea.We delivery the product to your port,then you take the related document to do the customs clearance .Then you can take the B/L to pick up the

machine.

2. If the volume is less than 1CBM,then you can delivery by express.You just need to go to do the customs clearance ,then the machine will be send to your door.