Trade Assurance apt-x blue tooth headphones 900 with CSR chips voice control function
USD $6.99 - $13.99 /Piece
Min.Order:10 Pieces
Shenzhen Houway Technology Co., Ltd.
New Products 900 best wireless bluetooth stereo headset with microphone
Specification:
Item | 900 Wireless Stereo Headset |
Frequency response | 20Hz-20KHz |
Working Current | 25~30 mA |
Bluetooth Version | Bluetooth 4.0 |
Support | HSP, HFP, A2DP and AVRCP/ Hands Free |
Usage | Smart Phone, Tablet PC, Computer, Laptop, Mp3/4/5 |
Effective Range | 10~20m |
Input | DC: 5V/130mA |
Microphone | 3pcs Build-in Microphones |
Frequency Range | 2.401-2.480GHz |
Distortion factor | ≤1% |
Music Time | Up to 10 hours |
Talking Time | Up to 15 hours |
Standing Time | About 500 hours |
Charging Time | 2 hours |
Rechargeable | USB micro 5 pin cable |
Trumpt | 10mm |
Voice Reminding | Power on/off/paring/paring successful/connected/disconnected..etc. |
Wear Ways | Plug in |
Output Power | 2x20mW |
SNR | S/N≥95 |
| Multipoint Connection Technology |
Call waiting | |
Call reject | |
Key Function | Auto reconnect |
| Easy pairing |
Apt-X compatible | |
Around neck wearing style |
Features:
1- NEXT key: short press for the next one function, long press fast forward.
2- PREV key: Short press to function on a long press to rewind.
3- VOL + key: Short press the volume increase
4- VOL + key: short press for volume reduction
5- On / Off slide switch: turn the switch to the ON position
6- few blue lights flash, first search for paired devices automatically connect when the search, automatically enters pairing mode 2 seconds after the long bright blue light, after the pair connected blue lights flash twice every three seconds, off when open connections, blue lights flashing about every three seconds, hit the OFF position shutdown, shutdown blue lights flash a few.
7- telephone keys: point in standby mode, press for voice dialing, call state short press to answer the call, and then tap to hang up, press 2 seconds refused to listen to the phone, the phone is turned on long press 2 seconds turn the phone with a Bluetooth headset mutual conversion answer, press 2 seconds for the end number redial.
8- play pause button: Music plays a short press Play / Pause.
9- pairing status five minutes without mating connector automatically shut down, matching the time 5 minutes; long bright blue light when paired, unconnected blue lights flash once an interval of about three seconds. After connecting the phone for about 3 seconds interval blue lights flash twice; reset off when charging Bluetooth can not be used while charging, long bright red when charging, charging is complete the red light off
10- have the power display.
11- pairing two phones at the same time or with a Bluetooth-enabled device.
12- intermittent calls vibrating alert when the device after the theft of more than 8M vibrating alert.
13- BT Reader installed on Android phone, you can read text messages.
14- using apt-X lossless audio transmission technology.
15- Call technical support HD (VoLTE, HD Voice)
Contacts : | Angela Li |
Tel : | 0755-36691791 |
Phone : | +8618898656725(what's app) |
skype | anglela2010 |
Homepage: | www.houwaytech.en.china.cn |
1) How can I place order?
A: You can contact us by email about your order details, or place order on line.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (HSBC bank) and Paypal, Western Union are the most usual ways we are using .
3) What's the order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 1-5 days if we don't have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
4)How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
5)How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.