Specifications

1)PE,PP & Fiberglass Mesh Plastic Formwork thickness:8-20mm
2)High quality with competitive price
3)Long life

PE,PP & Fiberglass Mesh Plastic Formwork is made of PE PP, fly ash, calcium carbonate and other fillers.

It is 5 layers, as the picture, outside two green surfaces are PP or PE, using the recycling material, such as the recycled film, package, the reclaimed plastic pipe, barrel and other things!

In the middle it is made by the fly ash, calcium carbonate and the other fillers.

 

And there are two layer fiberglass net in it!  It made the board have the high intensity, small distortion degree and small expansion coefficient.

 

The plastic building templates can replace steel templates and bamboo plastic sheet templates. Its advantages are as follows: low cost, light weight, it can continuous use 20 -50 times, Waste material can be re-used to do new building templates!

 

In the following it is some test result, you can see!

 

NO.	Item	Unit	Result	Standard
01	Tensile strength  portrait	Mpa	13.4	GB/T1040.2-2006/1B/10
02	Water absorption	g/m²	2.3	GB/T1034-1998
03	Shore hardness	HD	60	GB/T2411-1980
04	Vicat softening hardness  A50	°C	124	GB/T1633-2000
05	Simple support Impact strength portrait I type test sample	KJ/m²	9.3	GB/T1043-1993
06	Flexural strength   portrait V=5mm/min	Mpa	20.5	GB/T9341-2000
07	Modulus of elasticity in static bending   portrait V=2mm/min	Mpa	2080	GB/T9341-2000
08	Retraction ratio 135°C 2h length and breadth	%	0.18/0.22